Recent content by f2tmg

After 600kg of both around Lincolnshire Thanks

As title really got a mx150 that i need the oil out of so i can pull the pto unit but can't find the drain plug, manual says it should be under the hitch but can't find it. Do i need to be dropping the whole hitch off to get at it?

After both a box grader with ripper tines and a back blade with a pivot so blade angle can be changed preferably on cat 2 or above pins. Tow grader would be even better if the price was right Based near Sleaford, Lincolnshire

Yes have been buying the pallets of clinic up off marketplace but not showing up this time and don't know the company that delivered them so can't go direct, as you say delivery time was great on them

Only has gallup at £59 for me, shame as I need to order some. And will be ordering a IBC if my account goes though in time [emoji106]

As someone who can't deal with ladders and certainly isn't getting in a forklift cage, I use the combine for guttering and lights. Definitely isn't approved but it can't leave you stuck or fall, is stable and on our lexion at least the engine bay is an enclosed area to stand in and the engine...

Ditch banks is mostly what our krm does, once round the top then once in the ditch, can't quite get to the bottom of a big one but does most of ours. Shame its just a massive pain to get on and off a tractor, never got a manual with it so maybe it has a method for doing it easily. Not the same...

Also have a bag lifter thats good, paint scratches off just looking at it though

Got a bomford B467 thats had the pressure relief valve played with and now keeps stalling the head under any kind of load. Whats the best way to set it? Got a test kit but no ports on the block or motor to screw into, so until i get my hands on the big adaptors i'd need to put it inline can i...

The Borg Warner turbo on our John Deere engined claas axion has packed up and wants a rebuild/service. However no one will touch it and all point me back to dealer which is fine but a rebuild would be a lot cheaper than the £1800 that claas want. Anyone know who will rebuild them or who sells...

Trying to see if we could save any money on the water bill. I know being able to swap company's is relatively new but a decent comparison site hasn't jumped out at me. Failing that what are other people paying, currently with wave's streamline green tariff at £48 a year and £1.4159 a m3 Not...

Ours is wired though a manual two way switch at the minute as the dial part burned out, it's a shared earth and you power it which ever way you want to turn it. Booms are the same just power the solenoid and it shuts the boom off Alternatively manually set the valve by turning the motor but...

We run a Mzuri on heavy clay which had bad blackgrass here with 300mm spacings and using the narrow points, the blackgrass is a shadow compared to before and let us cut fungicide right back certainly didn't affect yield

Anything considered

Looking for a one with around 500m of pipe.