Buffalo Jim's latest activity

  • Buffalo Jim
    Buffalo Jim replied to the thread Massey 6270 drive problem.
    Will give this a check tomorrow
  • Buffalo Jim
    Buffalo Jim reacted to MF CI's post in the thread Massey 6270 drive problem with Like Like.
    I would say you've lost autotronic supply 12v and the hi/lo syncro is in neither hi or low blocking the gear change. Check the yellow wire.
  • Buffalo Jim
    Buffalo Jim replied to the thread Massey 6270 drive problem.
    Steering is perfect the gearstick won’t even move over to get into gear it’s like the tractor still hasn’t been started
  • Buffalo Jim
    Buffalo Jim replied to the thread Massey 6270 drive problem.
    No linkage working not sure on spools to be honest
  • Buffalo Jim
    Tractor will not going into gear or drive , starts up no problem but can’t actually move the gearstick to put it into gear no abcd...
  • Buffalo Jim
    Buffalo Jim posted the thread Massey 6270 in Machinery.
    Dynashift light c is staying on all the time even when ignition turned off any ideas anyone ? Thanks have checked bulbs and all fuses...
  • Buffalo Jim
    If I remember tomorrow I’ll get you heel stone to brisket and heel stone to head rail there more important than width we run at 1m width...
  • Buffalo Jim
    Buffalo Jim reacted to alan6430's post in the thread round bale silage for dairy cows? with Like Like.
    We do a lot of bales and some clamp. We can come off clamp silage onto very average bale silage and see the milk go up 1.5litres. Last...
  • Buffalo Jim
    Buffalo Jim replied to the thread Tier 2 6480 lift.
    @dee turned out to be draft control sensors , unplugged and away she went perfect .
  • Buffalo Jim
    Buffalo Jim reacted to dee's post in the thread Tier 2 6480 lift with Like Like.
    The tractors lift ecu has lost the parameters You'll need to put a laptop on it to set them
  • Buffalo Jim
    Buffalo Jim replied to the thread Tier 2 6480 lift.
    Thanks have the dealer coming just hard to get atm with the good weather
  • Buffalo Jim
    Buffalo Jim replied to the thread Tier 2 6480 lift.
    @dee @masseybreaker i know use guys helped me before cheers
  • Buffalo Jim
    Buffalo Jim posted the thread Tier 2 6480 lift in Machinery.
    Lift won’t work at the minute will work when manually push solenoids , getting flash code 1 7 , electric spools won’t work either but I...
  • Buffalo Jim
    Buffalo Jim replied to the thread Trade waste bin.
    Normally trade waste bin was working out about £600 per year , but local waste company that said no to black plastic etc in there have...
  • Buffalo Jim
    Buffalo Jim replied to the thread Trade waste bin.
    Soooo went to local waste company for price of trade waste bin. told him my intentions all waste and he said black bale wrap could not...
Top