Recent content by jonty

Hi anyone know if there is any fuses on Leyland 245 My fuel gauge and water temperature stopped working at same time seems on wiring diagram they connected but can't find a fuse Thanks

Thanks for your very helpful replies we have found power was being picked up from dash to side lights but head and dip wires still live Thanks Jonty

The switch is not connected but lights are on

No did not have indicator S they were optional

Just normal cab no cladding

Hi I have put side lights on mudguards as original lights cordoded also new switch problem is side lights wires not connected both ends but they are alive also wires to headlight live and not connected to switch Any ideas where they are getting power from I am baffled wires are as wireing...

Hi can anyone tell me if I need to remove front end to get sump off Leyland 245 thanks

Thanks for replys sorted now don't know if wrong cable was fitted but it wasn't going far enough in at engine end so shortened outer cable about 1in works fine now thanks for comments Jonty

Thanks that's very helpful I will check it out

Yes looks like picture the cable is square it looks new there doesn't seem to be anything for it to fit into that's why i thought something might be missing thanks for reply

Hi got Leyland 245 with perkins 3 cylinder engine having problems with taco drive from rear of engine difficult to get at but seems something missing that cable fits in anyone have any ideas thanks

That sounds possible will have a look thanks for that

I haven't welded up it must have been like when I bought it

No sorry no-one came up with any suggestions I have since found a linkage disconnected on the side where lever goes in and one half welded up not had tractor long so don't know it's history

Hi anyone know why MF240 hydraulics won't hold in position control If arms are lifted half way with position control lever they come to this then keep slowly keep creeping higher Thanks Jonty