Recent content by lexion780tt

Will have a look its got a loader frame on is a pig to see anything as long as I get pin in and take number one rocker cover off to confirm its on 1 not 6 should be a winner thanks everyone

That's what I thought but when I took the starter off there was no slot?

Anyone now the timing procedure for re fitting injection pump to a 2009 mc power 6 its a ftp/iveco engine . Pump should come back timed up just wanted to now if there were any timing pins etc Thanks

Most dealers have different pricing structures for different parts of the world. They charge what people can pay.

0013018720 little one 0013003200 big one

Could be electrical or the big accumilator has gone as well. If you hear a gas escaping should be OK if not much gas and oil come out accumilator has failed. The bigger one of the 2 by rear right wheel is boom suspension dose the orange light come on in the cab for it?

Chech if there is gas in little accumilator just undo alen key screw on top

By right hand rear wheel chech of the little accumilator has gas in. That supplies pressure to servos with engine off. Will boom lower when you push buttons to de pressure

You can split the screens

Yes you just need a splitter got this from as communications

Think with the vibration of the engine metal ones would cut through the looms after taking the ones out of engine have managed to find some £50 for 100 but better safe than sorry

We have been using the old reichard 2g modems but there obsolete now John deere do there own modem just wondered what else is compatible we use v55 sierra ones on anything else

For a jd star fire 6000 what type modems could you use rtk on ntrip account? Can any off the shelf one be used or dose it need to be a specific one?

Wire ties to hold injection loom to pipes inside the engine its a cursor 13 ftp engine

Was after some wire ties for using inside a engine would need to be oil and heat proof. Carnt find part no for the originals