Oat's latest activity

  • Oat
    Oat replied to the thread Charity combine run.
    I saw them earlier, and they were pulling onto the grass verge to let cars pass, so they're not just waiting for lay-bys (y)
  • Oat
    Oat replied to the thread Refurbished IBC for water storage for Ag Spraying.
    I used use a couple of these and some IBCs. The orange juice tanks had taps on them which I think a colleague fitted. All had camlock...
  • Oat
    Oat replied to the thread Topik vs Axial.
    With AXIAL or TOPIK (or equivalents), be careful of using them in close sequence with hormone herbicides for broad-leaved weed control...
  • Oat
    Oat replied to the thread Growth regs question.
    I once made a mistake spraying Moddus and applied at 1 litre/ha instead of 0.1 l/ha on winter barley. The crop grew to about half the...
  • Oat
    Oat replied to the thread Bracken.
    I think Para 2.3 will perhaps be a positive. If decisions are made on a more devolved and regional basis, then potentially there may a...
  • Oat
    Oat replied to the thread Indoor aerial options.
    use a signal booster. This plugs in between the aerial and the TV. It will require a power source, so you need an extra plug socket...
  • Oat
    Oat replied to the thread Slurry bugs, do they work and how else to empty a lagoon.
    Yes they work. The trick is to add a little and often. My dad would add some everyday into the reception pit, and pump into a slurry...
  • Oat
    Oat replied to the thread what grinds your gears.
    For several years I used to query water meter readings, as every time I got a bill the meter reading never matched the one I could see...
  • Oat
    Oat replied to the thread ATV Boom Sprayer.
    You need a decent pump to power 5 or 6 nozzles. In the past I have turned off the tank circulation to increase the pressure and get all...
  • Oat
    Oat replied to the thread Ratchet straps. Worth a watch.
    From watching the vid, I guess tieing a loop in the cut end isn't a good idea 😅
  • Oat
    Oat replied to the thread Cutting OSR.
    maybe, maybe not. Even on tramlines the canopy can meet and become intertwined over the wheelings.
  • Oat
    Oat replied to the thread Cutting OSR.
    Absolute minimum is one side knife, and cut round and round with the knife on the uncut side. But ideally buy 2 and cut up and down
  • Oat
    Oat replied to the thread Weekly Caption Competition.
    The new Prime Minister really is the dog's b0llocks
  • Oat
    Oat replied to the thread MF30 drill calibration.
    You probably wouldn't be too far out with wheat settings.
  • Oat
    Oat replied to the thread Bracken.
    If the bracken is taking over the hedge, you may find that most of the spray hits the bracken anyway, and not much hits the hedge plants.
Show older items
Top