-
-
Oat replied to the thread Charity combine run.I saw them earlier, and they were pulling onto the grass verge to let cars pass, so they're not just waiting for lay-bys (y) -
Oat replied to the thread Refurbished IBC for water storage for Ag Spraying.I used use a couple of these and some IBCs. The orange juice tanks had taps on them which I think a colleague fitted. All had camlock...
-
Oat replied to the thread Topik vs Axial.With AXIAL or TOPIK (or equivalents), be careful of using them in close sequence with hormone herbicides for broad-leaved weed control...
-
Oat replied to the thread Growth regs question.I once made a mistake spraying Moddus and applied at 1 litre/ha instead of 0.1 l/ha on winter barley. The crop grew to about half the...
-
Oat replied to the thread Indoor aerial options.use a signal booster. This plugs in between the aerial and the TV. It will require a power source, so you need an extra plug socket...
-
Oat replied to the thread Slurry bugs, do they work and how else to empty a lagoon.Yes they work. The trick is to add a little and often. My dad would add some everyday into the reception pit, and pump into a slurry...
-
Oat replied to the thread what grinds your gears.For several years I used to query water meter readings, as every time I got a bill the meter reading never matched the one I could see...
-
Oat replied to the thread ATV Boom Sprayer.You need a decent pump to power 5 or 6 nozzles. In the past I have turned off the tank circulation to increase the pressure and get all...
-
Oat replied to the thread Ratchet straps. Worth a watch.From watching the vid, I guess tieing a loop in the cut end isn't a good idea 😅
-
Oat replied to the thread Cutting OSR.maybe, maybe not. Even on tramlines the canopy can meet and become intertwined over the wheelings.
-
Oat replied to the thread Cutting OSR.Absolute minimum is one side knife, and cut round and round with the knife on the uncut side. But ideally buy 2 and cut up and down
-
Oat replied to the thread Weekly Caption Competition.The new Prime Minister really is the dog's b0llocks
-
Oat replied to the thread MF30 drill calibration.You probably wouldn't be too far out with wheat settings.
-
-
Loading…
-
Loading…