jest to let you lads that replyed to my problem with fordson major I am waiting for a dyno to arrive but could be a while but will keep you informed thanks again rustypete
help needed here lads did the head up ground the valves left it on the bench upside down put tissue under it poured diesel on top of valves left for 12hrs no diesel wept past valves or the seats fitted head on block all new gaskets including new valve stem seals the thing is it is blowing oil...
manitou mlt 626t gear box oil level do i leave manitou running to check the oil level on dip stick or stop the engine put it to the mark on stick first time with it stopped started engine then stopped checked again level away down on stick thanks rustypete
jest to up date you emptied hydraulic tank first jest to make shure it was clean which it was. Removed suction rubber hose to pump it was fine checked all pipes going on to valve block 2 off them were slack so stripped the whole lot off and fitted new O rings were needed and hay presto working...
yes it is air gauze in the oil tank could be clogged reply to you later as not going to the job till sunday any tips i will check hose from tank to pump incase it is breaking up inside
air so going to drain tank and take a look at the outlet gauze and the rubber pipe to the pump as could be breaking up with age a post on here advised me will let you know as working on manitou on sunday thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.