Recent content by scout3221

I was thinking the same thing. Add an reducer to 300psi. But is it really that easy in reality. A lot of tractors do the same. Single main pump and that's it.

They said no. They cant rebuild/manufacture this type of pump.

Im from Latvia, Riga.

Maybe i can get a used one , just need to see the gears and housing before buying it. I live in Latvia, we don't have anything like that here available.

It is FK4008213. But that price is absolutely stupid. if it was 1 or 2k I would think about buying it so I don't have to sell that tractor, but 5.5k isn't worth it.

Hi. So. I have been driving with low transmission oil pressure at idle for 2 years now. Finally took the tractor apart and the pump is gone, Deep grooves and tolerances are way off. Called my local parts deals to order a new pump and that's where the fun began. There is a new pump available for...

We sent the pump for rebuild and he said that he cant get the boost control unit anywhere (ours was destroyed), he rebuilt the pump and injectors but its now without the boost control. Maybe you know where to find one ?

Hello. I have a question about boost controller on fuel pump. We brought the tractor with broken boost control unit. We replaced it with just the adjustment screw. Should I crank it to max (whatever is the max, i think you dont want to be turning it to mutch) and let it blow a lot of black smoke...

pressure is about 2600psi now.

Found the problem. main pump relief valve was broken. When main pump died it had the same symptoms and while changing pump I did check the relief valve and it was fine. it must have broken as soon I as started the tractor with new pump and it had the same problem again :rolleyes: so I didn't...

How can I check if there is a leak in lift ass ? but it should switch from lift to aux hydraulic right ? or if I have a leak in lift ass then aux hydraulic wont work ass well ? Its lifts but with no power at all , barely moves.

aux pump is in good condition, I checked it for wear and all the seal are good. Now I need to figure out where the pressure from main pump goes, Couse its not going where it should. Have already checked all valves and they seem fine. where else can it go ? some oil channel broken somewhere, is...

I removed front pump completely and blocked the front pump oil pickup line and pressure line. Now there is 0psi everywhere . Main pump doesnt do anything. where is the oil pressure ? that oil must go somewhere... it feels like its going straight back

This is a parallel pump configuration ? Can you live with one pump or it will not work ?

I just put the tractor back together and the problem is still there :| . I have changed every single plastic seal and o ring in all the hydraulic system, checked every valve, spool, sleeve for damage (including lift arm cylinder and valve pack that's inside). One thing that I didn't touch is...