Old Grain store

crazy_bull

Member

Livestock Farmer

Location

Huntingdon

• Sep 27, 2016

• #2

where are you?

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 27, 2016

• #3

just outside portsmouth 10 mins of the A3 or A27

probably a bout 3 - 3.5 hours from you if you location is correct

 

crazy_bull

Member

Livestock Farmer

Location

Huntingdon

• Sep 27, 2016

• #4

yeah probably too far, one of my customers has a similar sounding set up and is always hunting for parts, I will mention it to him.

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 27, 2016

• #5

happy to hold onto bits for a while if its means it gets a better home than the scrap heap. Must be someone with a backload going that could shift it at some point.

 

F

fastfish

Member

Location

Devon

• Sep 27, 2016

• #6

Got any carrier c5 conveyors looking for a head ,tail, chain, and single phase motor

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 27, 2016

• #7

Will gets pics of chains, motors etc up tomorrow

 

Try to succeed

Member

• Sep 27, 2016

• #8

Hi, any chance you could post a picture of the cleaner and sieves?
Cheers

 

S J H

Member

Livestock Farmer

Location

Bedfordshire

• Sep 27, 2016

• #9

@grainboy

 

An Gof

Member

Location

Cornwall

• Sep 27, 2016

• #10

Interested in the Kongskilde trip weigher. I have one thats becoming a little tired. Is yours serviceable or good for some parts?
PM if you prefer

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 28, 2016

• #11

have put various pics up in classifieds. Will get more pics of motors etc as we dismantle. If you want any specific info please ask

This is some old stuff, not shiny and new and was put in here in 1976 but did a job for us until a few years ago when we stopped arable farming.

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 28, 2016

• #12

fastfish said:

Got any carrier c5 conveyors looking for a head ,tail, chain, and single phase motor

Click to expand...

unsure of makes and the terms "head" "tail" im afraid........let me know if specific pics will be of use

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 28, 2016

• #13

Try to succeed said:

Hi, any chance you could post a picture of the cleaner and sieves?
Cheers

Click to expand...

cleaner posted in classifieds....hope you were not expecting some fancy new thing

will dig sieves out from behind the junk thats been stored in front.

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 28, 2016

• #14

An Gof said:

Interested in the Kongskilde trip weigher. I have one thats becoming a little tired. Is yours serviceable or good for some parts?
PM if you prefer

Click to expand...

should be fine for parts or a quick wire brush over and lick of paint would look quite tidy again. Was working fine when we used it last

 

T

theboytheboy

Member

Arable Farmer

Location

Portsmouth

• Sep 28, 2016

• #15

Also got 2 x Marconi Moisture Meters

One is a TF 933A and i need to look at thte other one to identify it.

• Converted to mains power
• Complete with compression cell, mini grinder and instructions
• Full working order
• No calibration certificate