Trimble/Nh Ag262 receiver

cosmagedon

Member

Location

North Wales

• Dec 2, 2016

• #1

Is there an adapter plate to bolt under a 262 receiver so it clips straight onto the NH roof bracket that you get on a autosteer ready tractor?

Also whats the difference between a 262 and the newer receivers? Is it still as good with egnos and rangepoint?

 

Robt

Member

Location

Suffolk

• Dec 3, 2016

• #2

Yes you can get bracket, 262 is old tech so should be very very cheap. It's non glonass so will be fine with egnos but I think rangepoint uses glonas so it's a no no

 

cosmagedon

Member

Location

North Wales

• Dec 3, 2016

• #3

Robt said:

Yes you can get bracket, 262 is old tech so should be very very cheap. It's non glonass so will be fine with egnos but I think rangepoint uses glonas so it's a no no

Click to expand...

Perfect thanks

 

T

Turra farmer

Never Forgotten

Honorary Member

• Dec 4, 2016

• #4

cosmagedon said:

Perfect thanks

Click to expand...

How are you pleased with Kuhn baler in silage ? Any speed in straw ?

 

cosmagedon

Member

Location

North Wales

• Dec 6, 2016

• #5

Turra farmer said:

How are you pleased with Kuhn baler in silage ? Any speed in straw ?

Click to expand...

Hi, yea really impressed with the Baler it's a joy to use, especially in silage compared to the belt baler it replaced. Haven't done any straw with this one but the demo last year went very well. Only thing we would do different is order a 3135 as it comes with a different control box that let's you adjust the bale density from the cab.

 

G

GPS_Support_2014

Member

• Jan 14, 2017

• #6

cosmagedon said:

Is there an adapter plate to bolt under a 262 receiver so it clips straight onto the NH roof bracket that you get on a autosteer ready tractor?

Also whats the difference between a 262 and the newer receivers? Is it still as good with egnos and rangepoint?

Click to expand...

RangePoint RTX and any of the other RTX services is not supported on 262. Only EGNOS, OmniStar and RTK is supported.
Subscription required for OmniStar and unlock + radio or modem needed for RTK.

 

cosmagedon

Member

Location

North Wales

• Jan 14, 2017

• #7

I've just got the kit all up and working, it's already unlocked to omnistar but it's expired. How much is the annual sub and is it good enough to drill with?

 

G

GPS_Support_2014

Member

• Jan 14, 2017

• #8

Download the word document on this page for prices:
http://www.omnistar.com/ordernow.aspx

Most people are either using EGNOS, RTX or RTK now and I actually haven't heard much on the performance of OmniStar lately.
It should be suitable for drilling. You can contact OmnisStar and they are usually flexible enough to provide a demo subscription to try it out for a few days.