Steevo
Member
- Location
- Gloucestershire
Today at work
- Thread starter Penmoel
- Start date
- Location
- North West
Only one job today, put the 3220 back together.
Started with a spot of cleaning. Before
After
New stem seals and valves back in.
Head bolted down and teppets set.
Lots of other bits bolted on
All back together and running
This pics just for @holwellcourtfarm
More progress on the bridge
That’s it till Wednesday folks, cos I’m taking the mrs away for a few days
Started with a spot of cleaning. Before
After
New stem seals and valves back in.
Head bolted down and teppets set.
Lots of other bits bolted on
All back together and running
This pics just for @holwellcourtfarm
More progress on the bridge
That’s it till Wednesday folks, cos I’m taking the mrs away for a few days
Attachments
Fraserb
Member
- Location
- Scottish Borders
Out with the drone again
Only one job today, put the 3220 back together.
That’s it till Wednesday folks, cos I’m taking the mrs away for a few days
can post in today not at work then
Fraserb
Member
- Location
- Scottish Borders
REStracTORATION
Member
Coming along quite nicely
- Location
- North West
I’m may sneak a couple in “today not at work” thread to feed my tff addictioncan post in today not at work then
DaveJ
Member
- Location
- Montgomeryshire
Nice to have it dry.
Knocked some more muck about, View attachment 637608local contractor, "dead eyed" Dave turned up for a ph catch up, and an annual natter
Dave has been here several times too. Nice fella. Does the spreading for Gwynne Thomas Haulage.
DaveJ
Member
- Location
- Montgomeryshire
Poor little Massey 362 A fair way from the station, so unfortunately too late to do anything with the tractor. We did though manage to stop all bar minor spread to the shed.
A fair way from the station, so unfortunately too late to do anything with the tractor. We did though manage to stop all bar minor spread to the shed.
Shovelhands
Member
- Location
- Sunny Essex
Poor little Massey 362
That’s a shame
, maybe the MF could be @REStracTORATION ‘s next project 
- Location
- the brecks norfolk
I realised after I posted, sim told me Chris had been doing a lot of work with them for a article which he was hoping to have done for this month's edition, he'll be on the cover of razzle next monthThis month's classic tractor
Spoke to Sim earlier,really really frustrated
John orford reckons we have another month before getting worried....[emoji38], I did say I'd like to get a crop in afterwards [emoji23]
I admire john for not getting flustered yet but In a month's time this years crop wants to be in the ground never mind last year's.
REStracTORATION
Member
Now that would test me
Ioan annwyl
Member
Are they upside down ?
- Location
- North West Wales
I went to pick up my tiles in the trailer aswell on a pallet as they could not deliver for few days and the lads were waiting for them. Never have I driven so carefully avoiding every pot hole and bump along the way!! They had come from Italy unscathed and knowing my luck I would crack half of them on the last 12miles of the journey!!!
- Location
- East yorks
3rd dry day and still too wet for land work so thought I would do some pruning
- Location
- Eastern Ontario Canada
Change of pace yesterday. Welding some leaks in maple syrup evaporators.
davidroberts30
Member
- Location
- pembrokeshire
He could always blame it on the curvature of the earth!nearly got the auto steer set up
Nearly
Member
- Location
- North of York
They're actually side sheets. They're left over from a shed at previous farm.
Doing a job.
Last edited:
haulmblower
Member
- Location
- Staffordshire
There is a little hill in the field. It's an optical illusion not a wiggle