Zetor gear problems

A

Andy84

Member
We have a Zetor Forterra 9641 2008 model and it depends to have developed a problem with the gears - either shifting up or down with the buttons there seems to be a delay and sometimes doesn't shift at all. Has anyone had this or got any suggestions?
 
Zetor

Zetor

Member
Location
Northumberland
Andy84 said:
We have a Zetor Forterra 9641 2008 model and it depends to have developed a problem with the gears - either shifting up or down with the buttons there seems to be a delay and sometimes doesn't shift at all. Has anyone had this or got any suggestions?
Click to expand...
First have you enough oil in the transmission? Have you enough air pressure?
If all above is ok
Take the floor mat out and remove the centre floor panel over the transmission.
On top of the transmission you'll find a small plastic cover, remove this and you'll find the air solenoids that control the splitters it is likely that one of the springs that return the solenoids has snapped.
 
D

David 9641

New Member
Hi , I have a zetor 9641 2001 model.. I have the same problem @andi84 has... the air Solenoid piston is coming out in its 2 stage and pulling back in its 2 stage.. when the tractor is running idle and u change back ur torque setting to turtle the tractor starts to labour but when u change back up to hare stage it stops labouring..
 
J

jf850

Member
Location
Co laois
Andy84 said:
We have a Zetor Forterra 9641 2008 model and it depends to have developed a problem with the gears - either shifting up or down with the buttons there seems to be a delay and sometimes doesn't shift at all. Has anyone had this or got any suggestions?
Click to expand...


I have a 06 10641 , and it what I did , upon getting a Zetor dealers advice was .
Remove floor hatch . Replace broken spring , remove and replace solenoid , basically to clean connections , and then spray moving parts with WD 40.
I can't actually remember what symptoms mine had , possibly stayed in high split.
 
D

David 9641

New Member
jf850 said:
I have a 06 10641 , and it what I did , upon getting a Zetor dealers advice was .
Remove floor hatch . Replace broken spring , remove and replace solenoid , basically to clean connections , and then spray moving parts with WD 40.
I can't actually remember what symptoms mine had , possibly stayed in high split.
Click to expand...
My spring isn’t broken and the solenoid is working so where do I go from here?? Thanks
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 105 40.9%

  • Up to 25%

    Votes: 93 36.2%

  • 25-50%

    Votes: 39 15.2%

  • 50-75%

    Votes: 5 1.9%

  • 75-100%

    Votes: 3 1.2%

  • 100% I’ve had enough of farming!

    Votes: 12 4.7%
See comments…

May Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

Apr 02
  • 1,688
  • 32
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, May 21 · 10am - 2pm GMT+1

Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
News
Continue…

Share this page

Top