- Location
- mid cornwall
Many thanks, was just checking there wasn't an alternative to going into the menu and switching it off
will probably leave it switched off most of the time if it gets to stay
The Demo Thread
- Thread starter Bald Rick
- Start date
will probably leave it switched off most of the time if it gets to stay
Mouser
Member
- Location
- near Belfast
Be quicker just turning engine off, then key back on, press buttons/wiggle joystick to release pressureMany thanks, was just checking there wasn't an alternative to going into the menu and switching it off
- Location
- South wales
Hardly it’s literally a few button clicks
Mouser
Member
- Location
- near Belfast
It's a lot of clicks on a 57 dash screen
- Location
- mid cornwall
Tried that, when pushing to 2 buttons with just the ignition on it just locked the electric spools (illuminates the lock switch by the manual levers)
- Location
- mid cornwall
When trying to explain it over the fone earlier (I'd gone ploughing and they wanted the shear grab off) it felt long winded and complicated
Last edited:
James
Member
- Location
- Comber, Down
Push either the h3 or h4 button at the same time as the button on the back of the joystick and you'll see the pipes out of the multidock twitch as the pressure is released
- Location
- mid cornwall
I shall try that when I'm back on it
- Location
- mid cornwall
Doesn't look like it, the lower 4 are all blank and don't light up
- Location
- South wales
Taught me something there cheers
James
Member
- Location
- Comber, Down
That's with the engine off and ignition on tho
Actually just tried it with engine on and it worked
YELROM
Member
- Location
- North Yorkshire
Have you been planing the road off with it
YELROM
Member
- Location
- North Yorkshire
Kuhn SPW 25 Self Propelled Feeder Wagon
Year 2017, 10416 Hours, Hydrostatic Transmission, DG8000 Weigh System, Kuhn ISOBUS Screen, 6 Cylinder Turbo Engine, Twin Mixing Rotors, 495/45R22.5 and 445/45R19.5 Tyre's, Left/Right Hand Unloading, Hydraulic Drive Unload Belt, Radio, Air Seat, Air Con, Recently Re-Lined Tub. www.jrfirby.co.uk...
jrfirby.co.uk
Don’t know whether this is of any interest to you for what they might be worth secondhand, or if you are looking for a secondhand oneKuhn SPW 25 Self Propelled Feeder Wagon
Year 2017, 10416 Hours, Hydrostatic Transmission, DG8000 Weigh System, Kuhn ISOBUS Screen, 6 Cylinder Turbo Engine, Twin Mixing Rotors, 495/45R22.5 and 445/45R19.5 Tyre's, Left/Right Hand Unloading, Hydraulic Drive Unload Belt, Radio, Air Seat, Air Con, Recently Re-Lined Tub. www.jrfirby.co.uk...
Not looking at any SP feeder wagon. Local dealer insisted we have this on demo … and it would be rude not to but we would always need a telehandler and it’s useful to have the extra tractor in any case
- Location
- Very Southern NSW Australia
Be some job. Not sure how'd she'd go in a wet year on my dirt silage pads though. I bogged the tractor and Keenan a few times I'd probably need a tow every time with that.Don’t know whether this is of any interest to you for what they might be worth secondhand, or if you are looking for a secondhand oneKuhn SPW 25 Self Propelled Feeder Wagon
Year 2017, 10416 Hours, Hydrostatic Transmission, DG8000 Weigh System, Kuhn ISOBUS Screen, 6 Cylinder Turbo Engine, Twin Mixing Rotors, 495/45R22.5 and 445/45R19.5 Tyre's, Left/Right Hand Unloading, Hydraulic Drive Unload Belt, Radio, Air Seat, Air Con, Recently Re-Lined Tub. www.jrfirby.co.uk...
How do get against the pit walls to cut out the entire feed face?
No idea tbh … but the head looks to be the width of the machine.
Im told that they significantly speed up feeding and I will try and take more pics tomorrow when she’s working and give my impressions then. It just turned up this afternoon and was parked up
Fraserb
Member
- Location
- Scottish Borders
We've had a couple of different ones on demo in the past, it's surprising how quick you can feed with them as you're always in the machine.
