davidroberts30
Member
- Location
- pembrokeshire
do the wizzardThings are going better with the autosteer today. I was getting over 6 volts out of the press sensor, hence it was sitting at 75%. Had an Instrument tech from my work have a look. I had wired the press sensor direct to the 5v and ground output from the transformer. He linked the ground from the transformer to the tractor chassis and it was back reading 0.6V (I think from memory) across the terminals and 19% on the screen.
It is now steering but quite a bit of overshoot on the steering rams do need so play with the gain etc I think.