Ah ok so you need both for autosteer
AgOpenGPS RTK Autosteer, How to Guide for £1000
- Thread starter Andy26
- Start date
Yes, the autosteer board has the GPS, the IMU and the motor / valve driver all on one board, along with a teensy to integrate & control it all
Thanks, I think I’ll just try get it set up in tractor and try it for now.
Larel
Member
Can’t you buy a data only sim for an old phone and don’t tell anybody the number, using it only as a hotspot for AOG?
Northern farmer
Member
- Location
- North
This sounds odd, are you from the UK, which service are you using?
This cannot be an Android issue, must be something else. Parallel voice calls and data connectivity has been "built in from the start" for 3G networks and up. Even 2G networks have Dual Transfer Mode but not all phones and not all networks support it.
Sounds like your network redirects your phone to 2G for voice calls. Or perhaps 4G with no VoLTE on the phone? Voice over LTE can also be switched off from Android settings, check.
Same thing happens to me, Pixel 7 on Vodafone, it works perfectly, but if making a phone call sometimes it drops the data, can only think its switching from a patchy 4G connection to a 2G connection.
End phone call and RTK is back.
- Location
- Norfolk
Hi all, I’m still in the process of getting my system running smoothly but todays goal was to get a new tablet that I’ve bought working with the system instead of an old laptop I was using. when I plugged the PCB into the tablet it didn’t seem to be communicating with the PCB. I remember having to change to internet settings on the laptop and I tried to do this on the tablet but when I try to save the setting it says there a problem (picture bellow)
I was just wondering if any one else had got a system running on windows 11 or if anyone can help with my problem?
sorry for the long message and thank you in advance !
I was just wondering if any one else had got a system running on windows 11 or if anyone can help with my problem?
sorry for the long message and thank you in advance !
Watch the video on the agOpenGPS 6 playlist, everything you need to do is in there
- Location
- Norfolk
I think my problem is that I can’t change my IP settings on my tablet. It won’t let me save the new IPv4 settings. I don’t know if this is a problem with windows 11 because I did it fine on the laptop which is windows 10.
These are the settings I’ve got but you can see the message at the bottom saying I can’t save it.
These are the settings I’ve got but you can see the message at the bottom saying I can’t save it.
EE on a Samsung Galaxy, voice over LTE turned on, lots of signal showing and can see a mast line of sight most of the time. In Yorkshire so the signal will be well 'ard!
Searching the interweb now, lots of people complain of it as a problem on EE, I just assumed it was the way of things, so use a separate little wifi router to save any problems.
- Location
- Norfolk
I’ve got the same problem with my hotspot as well, I’m using an iPhone 11 with a Tesco sim and it cuts out when I’m on a call and it struggles to connect in the first place. Half the time I’m sat there and it won’t connect to the tablet.
Will Blackburn
Member
- Location
- Cheshire
Get a cheap data sim off Amazon.
Subnet mask wrong format. Use 255.255.255.0
Leave DNS and default gateway blank. Watch the video, ncpa.cpl is a more useful way to do it than that screen.
The bottom side is to solder any parts missing that are not mounted on the top.
AIO Board Pinout
GPS and Steer Boards. Contribute to AgHardware/Boards development by creating an account on GitHub.
github.com
Thanks
Will Blackburn
Member
- Location
- Cheshire