Search results

Finally got round to finishing these steps off

On our 7530 there’s a threaded hole on the back of the axel we’ve used to bolt the plate on needs a bit of fine tuning and trimming.

Lovely thank you I’ve just ordered one!

What’s everybody using for a tablet holder for a Panasonic FZ-G1? I was thinking order this https://www.amazon.co.uk/RAM-HOL-TAB19-Tab-TiteTM-Universal-Panasonic-Toughpad/dp/B00GBBBWPY and then make a bracket to fit existing mounts for other screens. Does this allow access to all the ports...

From my reckoning up of what’s needed I’m thinking about £1700? Does this sound about right?

I looked into this a bit back and emailed about a valve but never heard anything back so never got any further with it. Do you have any contact details for the bloke who makes the valves? or is anybody importing them? Thanks

Considering putting autosteer on to our JD 7530 which is not autotrack ready with the FETF47 grant. I’ve looked at the fieldbee system and had a price. How do people rate this system? Is it straight forward enough to use? Are there any other systems people would recommend which would fit the...

We’ve just started finishing a few for warrendale among our others

2014 Murska 220 spares or repairs Comes with the gearbox No motor Needs new rollers For sale as we upgraded to a larger mill instead of repairing this. £200 Open to offers Collection from Wakefield

First go with the 880 and plough

Will give them a try thank you.

A friend has bought this plough to go behind his fordson major and we’re not too sure what the boards are on it. Would anybody be able to identify what they are and where we could get bits for them? Or does anybody have any other information about the plough? the mouldboards appear to be...

I think I do! I can check in the morning for you if that’s alright?

Might have to have a go at this when I get a minute thank you!

Been having a play with it making an idler for a chain on an angleveyor.

Been quoted £190-200 with a free skip for mixed farm scrap today.

Unfortunately not 🤦‍♂️

Yes going to get the belts covered once it’s back together. Currently got the lid off to find out why it was labouring a bit and seems like it has the wrong oil in it. The manual recommends sae20 oil and it looks more like thick gear oil in it. This has been making the clutch plates bind a bit...

Thank you for all the advice! Will have to have a play when the set of cutters arrive.

I’ve sent you a message.