Hi,
Hoping someone out there can save the day and shed some light on this problem!
MF3095 Dynashift Datatronic tractor, L reg. Stopped working yesterday when topping - lost PTO, 4 WD always in, no dynashift. When you put your foot on clutch and hold down Dynashift will change through A to D...
Thanks again for the pointer. We tested power sequence to the solenoids and found that at B both solenoids powered up but remained powered when cycling through C and D. Hence why we are only getting A and B. That must then surely point to a fault in the black box????
Thanks. We have just taken her for a spin. The four wheel drive does not disengage when going flat out when it is pushed on. We disconnected all plugs going into the LED display behind the dash and with no lights we still had A and B but no C and D. Is it possible one of the solenoids, the top...
Thank you for suggestions. Have managed to ascertain that we have good power going to the solenoids and you can hear a change in engine note when changing from A to B. You can also hear a change of engine note when you disconnect both solenoids which presumably is her going into D which is the...
Hi, I would be grateful if anyone on here has any ideas as to a fault that has developed on our MF3095 Dynashift. We have A and B but no C and D. The lights all come on when you put your foot on the clutch and she reverts to A on start up. I am not sure what the issue could be and our local MF...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.