Search results

Looking for a replacement of my Bobcat S175 with 8,000 hours. Want a similar machine but time for something newer. Anything about? Bobcat, JCB, etc? SW England preferred,

Any second hand tiny bulk tanks about?

That’s my thinking, the wiring is difficult to follow on a typical bobcat way. I guess I need to take the alternator off and get it tested?

Have a 2007 S175 and I seem to have an alternator problem. battery light/beeper comes on when in use, although not all the time. Keeps running flat so I have to put it on charge once a week or so. put a new alternator on but that hasn’t made any difference. Also put a kill switch on the...

Ideally after a legged Symms Bin or similar that can be connected up to a feed auger system Anything about?

Looking for some second hand batch feeders to put into a one-side herringbone with 12 units. Anything around in the south west?

I think you might be right in the hydraulic pressure. I’ve tried starting but dropping the link arms down and it starts...

Sorry chaps, just realised I never replied. The jump lead on the negative as an earth doesn’t seem to make any difference. The battery is a fairly new one. I’ve put it in my mains power boost for 10 mins and it turns over well for a few seconds and dies to nothing and just clicks... Any more...

Hi How many do you have and where are you?

We have a 680 litre little blue Alfa Laval bulk tank we use. It’s had a new compressors etc and is working but the control box isn’t working 100% is there anyone around with one of these tanks sat idle that would sell the control box? Thanks

thanks

I have a 12 unit one sided herringbone parlour, looking for a feeding system I.e control box, auger, hoppers. Does anyone have anything going cheap in the south west?

Hi, Ive got a bobcat skid steer, looking for a cheap straw spreader that could be put on it or adapted to fit. Anything about? Thanks

hi, I have a really old Alfa Laval 680 litre bulk tank, but no calibration chart, does anyone have one? Thanks

I’m not mechanically minded and I know it’s cold outside: but I just can’t get my MF 595 to start. I’ve disconnected the battery and put it in charge over night, then reconnected in the morning, done the usual of leaving it for a few mins for the glow plug to warm up and it turns over a couple...

No problem, can you let me know what you want for it and send me a few pictures? 07899 955935

Looking for a britmilk milkmade automatic milk feeder, what’s about?