Search results

At silage this evening when loader went into limp mode with code P244A-93 showing. When we pulled it off the pit, we discovered that the pipe leading from the turbo to the DPF was off at the turbo end. We reattached it but the we still have the fault code and the limp mode. Does anyone know how...

I have a jcb 310 with a bad leak through 2 of the solenoids on the spool block. Quotes 600 euros pulse VAT per solenoid from JCB main dealer. Does anybody know can these be bought anywhere else for more reasonable money. TIA

Has anyone ever had an outbreak of Tick Borne Fever in dairy cows? A quick rundown on our case: On the 20th of April, I had six first calvers with no milk and high temperatures. I immediately suspected IBR so the vet recommended that we vaccinate. Symptoms cleared up and heifers came back...

I have a 2004 Ts125a sle new to me that is putting on the engine oil pressure periodically. It may not come on for days and then as today it comes on in the middle of a field with an error code 14109 i think. Usually as with most people you turn it off immediately. Turn it back on and everything...

Feeding cattle this morning and oil pouring out of the front of the boom. It looks like the oil is leaking at the carriage end of the boom. About the only hose we haven't replaced on the loader. Do we have to split the boom? We have replaced the hoses on our previous loader a matbro many...

As above lift wont work. Orange light flashing on seat beside lift button. The mudgaurd buttons work lift at the moment. Happened a while ago again but started again on it's own. Same problem now again. Can anyone point me in the right direction to sorting it please. Also the lift has gotten...

Changing axle and hub oil in the loader. Asked man I buy oil from did he have oil suitatble and he said MorrisTractelf bf 16 is exact same spec as equivalent JCB oil. Does anyone know if this is ok? TIA

Nh is a 2004 dual command. Since I bought it new when you start it you hear a hyd squeal for about 30 seconds then it cuts out and after that its quiet. Today when I was spreading fert this hyd noise cut in and nothing I could do would stop it.Tractor is now labouring under pump and oil is...

I have a Jcb 310. It replaced a matbro tr 250 which when you were waiting for the shear grab to close once you braked the transmission stopped. With the Jcb it's pushing all the time even when you brake so you either have to knock it into neutral or push the break transmission button on the...

I have a NH Ts125a dual command. I assume this hasn't power beyond. I think it has open centre hydraulics. Does this mean it can never have power beyond. The reason I'm asking as I'm comtemplating getting a trailing shoe and salesman said it would be a big help. TIA

I have a JCB 310 2010 with 2500 hrs on it. I have it it six months. There was a small rock in the centre pivot when we bought it which we were told was normal. This has gotten worse over the silage time and now when you press the bucket to the ground, at the boom pivot it moves 1inch back and...