Looking for one in the 2 _3k bracket , unheard of make, maybe,Strimech have outpriced themselves, they are over 5k now, considering there paint job on my grain bucket is as thin as fag paper. What are we paying for here, steel has come back. Cherry x around 4k still to much imo.
What do people put on the thread to keep them working easy, the one on my main tractor is always getting seized up, I'm always cleaning the thread and putting WD 40 on it, I know I should take it off when I'm baling etc,, but it's a pain when you do need it and you put it somewhere and end up...
Not sure if there is any adjustments I can do or do all balers do it, basically when you eject the bale on sideland ground and the baler is the one way, the slider which determines how much net goes on does not fully drop but stays about halfway, you then only put half of the net required on the...
Supposed to be the correct one but breaks back before the tag is inserted into the other tag. Not the 1st applicator that's not fit for purpose I've had here , making the job really stressful and a bucket full of damaged tags, happens a lot on replacement tags as well, can anybody recommend a...
Had this machine for a couple of years, just had cover off to replace the quad belt, noticed the bearing that runs the front section is dry even though it has been greased or so I thought. Tried pumping through the bank of three and a pile of grease fell down from behind the panel, took the pipe...
Starting to get on my nerves now, putting ewes and lamb's out then bringing them back in due to wet weather. Silage supplies getting lower but cows still in sheds, no way they can go out until it drys up. Wanted to roll some wheat ground but that won't get done now, it's even to wet to put the...
Had a couple of ewe,s that have had the 1st lamb alive, but 2nd lamb was barely alive, the ewe i just helped had a healthy lamb which was coming ok but just needed a slight pull, the 2nd however looked ok but never showed much sign of life, the lambs are a good size as well, what could be wrong...
Rang up a supplier to order some heavy duty cable, turns out he can,t help me as i don,t know the core size. How do i find that out, it,s a very old oil reservoir welder type, i think its called a minx.
Interested to hear from drivers of both, currently running a BMW series 5 and it is a very good car, anyway we test drove a cayenne the other day, v6 3 litre, and I have to say I was disappointed, pulling away it was flat, it was like my dad's 20 year old heavy range rover, just revs and not...
Looking for ideas on best way to proceed, its a single storey building with 2 stone walls, these are in a bad state and will need some attention. The old roof which was curved has been taken off, planning permission states, we must have a curved roof put back, this will need to be insulated.
Be...
It it normal for a 4 year old hedge cutter to have holes appear in the oil pipes that drive the head. No contracting just farm use. Had a pipe go in the 1st year which was still in warranty.
When you compare it to my tele handler that would do a lot more work and barely had a pipe go in 9000...
Anybody recommend a safe option for lifting triple glazed glass window frames, there about 1.5 metre square and very heavy, took 4 chaps to unload them.
Axcess is limited, so ideally something to wheel them into place and be able to suspend them in the air on a frame. tia
In a nutshell there eating the wheat, chemical is band that would sort the job out. If I re-drill the same will happen, not sure what to do, any advice.
I have a fairly new above, the issue I have is the radio seems to work, the digital display is on and it scans for radio stations ok but can't get any sound out of the speaker's. Is there mute switch in the cab somewhere, the book doesn't mention one.
Basically my seed order is short, I have heard of some that mix undressed wheat with dressed, i have a clean sample in shed. How much should i up the seed rate, drilling next week at 170kgs/ha. Any thoughts.
Had the machine a few years now, happy with it except when taking off, which is quite frequent at the moment.. I,m sure McHale have fitted the wrong Jack, as it's to big, it won't swing around even when it's on a 165 hp tractor on big wheels. Dealership seemed uninterested when I mentioned it, I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.