We are currently looking to replace our 2013 JCB 536-60 with the same again just a little newer and fewer hours.
Can anyone recommend a dealer/specialist?
No joy with Scot JCB so far.
I’ve got a 536-60 AS and looking for a replacement. I would like to replace like for like but WITHOUT the god awful 6spd power shift. ive borrowed a couple of other JCBs and Manitous over the last year or so and IMO nothing comes close to the 536 for our needs, it has plenty power, it’s...
I have a JCB 536-60 that has a hydraulic problem. When the boom is retracted or the boom is dropped the hydraulics will overload the engine to the point where the engine will stall. It will overload to a small degree when the boom is lifted but not as bad. This is worse at idle but when running...
Had fault code C101A-29 come up today. It relates to "LLMI Transducer 1 range error".
Anyone had this before? it's £600 for the transducer so would be nice to have some feedback before letting JCB pull my pants down!
I’m looking at a flail mower for behind the quad. The Logic unit seems to be the one to go for but there are also cheaper alternative.
Does anyone have any experience of the cheaper alternative units?
Each time we chip timber for the biomass unit we have around 10-15 tons of bark left over in the yard. I have been tipping it in an "environmental pile" for the last couple of years but this has been raised in an audit so I need to get rid of it somehow, apparently its a "waste product"!
I am...
I have recently acquired an Aeroklas canopy for my Ranger but the hi level brake light fouls the canopy even though the canopy has a recess for it. The canopy was fitted to a 2016 model which must've had a slimmer fitting light.
Does anybody have a solution? Cutting the canopy is out of the...
Im slowly starting to get my workshop kitted out PROPERLY and need to address storage.
I have about 20 boxes of the assorted kits, you know the ones, assorted grease nipples, split pins, R pins, sump copper washers, fuses etc.
At present they are all stacked up in a cabinet and are a right...
The seat in my loadall has seen better days, I'm guessing the previous owner had an ass made of lead. The padding is no longer padding and more of a bucket seat than a comfy one and its causing havoc on my back, I can barely walk when I get out of it after a couple of hours.
Anyone replaced...
Here's one for you...
Ive been having some starting issues recently on the telehandler. On the odd occasion when I turn the ignition on, the cabin fan blows full blast (regardless of previous setting) and the dash screen does not illuminate or beep. When this happens it wont start, not even a...
We will be using c. 5000 tons of timber in our biomass plant in the coming year.
The haulage is eye watering so considering doing it myself.
90% of movements will be on forestry roads but may occasionally need to go on public roads.
If hauling our own timber to our own plant with an artic...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.