Search results

Just did mine the other day what a pig! Undo the 2 front cab mounts and left hand side rear one Remove rear wheel Remove gear lever Use bottle jack on top of steps to Jack up cab REMEMBER chock the cab up This will gain access the brake pipes Hope this helps you

Did that chopper come from gillies and Henderson by any chance?

Ah the nh400 Remember my dad got a demo in about 1988 looked the part the in-line idea great coupled it up to the case 856 in the field with the salesman this will do x amount in the day! 2 rows up the field what a pig in a poke! But see now that concept with a jf 1060 feed and drum set up what...

Cheers bud will have a look this morning

Interesting? Sounds dumb but where is the hydraulic valve?

Don't worry I thought I was the dog bo*licks when I got it last week! Your right it's old technology Not many people working on them now Every little bit of info makes a result

But the m/d cable comes out or the front lower spiked roller If you push the fingers up to the dog clutch all catch stop drive Your figure of 8 nylon bushing all works OK goes back and forth freely when forward/reversing

Put a bit of fence wire over the roller when running Nothing!

That plug is on the left hand side What's puzzling me is its all working but no detection ! A haha Is there any way of checking the magnetic Is there any voltage reading at the 7 pin plug Or is the module away?

Hi all I'm back.....just bought a claas jaguar 800 self propelled chopper and have a problem........ the problem I have is the metal detector will not detect metal, the pick up reverses as it should then press the button to forward all works fine dog clutch working. Is this electrical or is...

Where about in Yorkshire are you ? Cold yo p.m me pic of the cab please

Sorry for the rant about Chris pakkum but did you here the article on bbc radio 2 on the Jeremy vine show yesterday that he lost his pet poodle and can't bare to let it go yet! What a plank! What he should do is throw it outside and let his presous rapters forrage on it! Might save some of...

If I was you film the buggers in the act! Then forward the footage to Chris pakkum then see the bulls**t reply he comes back with? Bet he says it's the sheep's fault

Phone john kerry farm equipment at linlithgow Scotland My ex jaguar 61 is in his yard at the moment it's only chopped 500 acre from new would bount to do a job! As for a 40 a pig in poke!

Hi all We've got a mx 110 with front linkage front suspension 9000 hours only needed brakes last year 2 mc115s 1 with loader 09 reg the other 57 reg and a landing badged 7-165 same as xtx 165 11reg never had any problems with any of them Cheap horsepower and easy to maintain Just stay away from...

Hi all Our trusty old m reg 95x is needing a clutch. Change many clutches before on all other major brands before just wondering if I have to take the diesel tank off to access the top bellhouting bolts? If so how? Any info would be helpfull Cheers all

WHAT! I paid to much! Save you jokes to April the 1st pennine haha

Hi Got offered this tractor 1979 with a sekura cab on it. One owner from new generally straight and tidy with good tyres on it. Any ideas what it is worth? Cheers

Hi folks, Does anybody on here know where I can get main boom bosses where the carriage hinges from? Thanks

Its a p reg with lcd dash and 40 k Great old bus