Search results

Hi Need 20 x 2 meter Heras style mesh panels with feet and brackets for protection of tree during shed build. Based near York anyone know best place to get them from? Second hand are fine. Thanks

What's the thoughts on best position for shed door? Be interesting to know from people with a similar shed. 100 x 50 shed 23' to eaves General purpose Door 6m x 6m Gable in the middle? Side at one end? Ignore prevailing wind direction. Thanks

Morning Looking for advice from someone who's been through the pain of having solar panels put on a shed roof. I have planning in for 30 x 15 shed with solar panels on south facing roof. The electric board kindly installed a very large underground cable near to the proposed shed as part of...

Morning Gates were taken off my haybob 300, now can't get them back on. They are the type with the white plastic blocks at top. Is the bit with the plastic block meant to drop down to allow fitting? Thinking mine might be seized, otherwise can't see how you'd get them back on. Any advice...

Looking for a bullet proof diesel ride on for a few field edges plus verges and would do a decent job on the lawn as well. Seen a JD 1545 with a flail deck recommended but can't find one for sale, any other ideas? I'm always short on time so something quick would be good.

I have leak from the filler cap area of the tank of my John Deere tractor. I've tried a new genuine cap but hasn't made a difference so assuming it's the thread. Has anyone had any luck repairing the thread on a plastic tank?

Has anyone manage to get a decent result in a Telecoms Mast rent negotiation following the new act which considerably lowers rents? I have recently been contacted by the latest of many companies to deal with my mast rental, less than impressed with what they're offering. Had the mast for many...

Hi I'm at the point where I need to get a new oil tank, boiler is oldish. Looking to change my heating/hot water away from oil, I'm interested in renewable options but not sure how to get impartial advice. Has anyone who's been through this process got any experience of this and could point me...

Need to order 5 tags for new born calves the Allflex website knows my Herd ID but is asking for a 5 digit number. I have no idea what to put in the box and they don't take calls on weekends. Anyone know what I should be putting in, I assumed that the tags follow on from the last ones I ordered...

Hello I'm looking to put up a shed on my farm near York. Looking for quotations based on the following spec. Thank you. Size 6 no. 15 foot bays long 40 foot wide 20 foot to eaves Roof Concrete fibre roof Guttering and down pipes Orientation East – West Site Good access, fairly...

I have a persistent leaking RAm on my 551 loader, it's been fixed by the local hydraulic place a couple of times but a couple of months later it leaks again. I've been quoted £900 for a new Ram and being 1. Tight 2. From Yorkshire 3. A farmer I want to do it cheaper if possible. Should I...

As title suggests I would appreciate any tips on getting cattle into livestock trailer. I have a few cattle and occasionally move some of them with a trailer. I have a pen in the field which they go into easily when I put some feed in the trough. I work by myself and usually struggle get them...