Got a snapped hexagonal drive shaft, the one coming from the gear box on a non conditioner lely mower.
Everything has come apart pretty easily but i cant seem to get the shaft out of the gear box. Is there a pin in the gearbox end or is it just rust holding it ?
Didnt want to get too brutal...
Morning all.
Got an mtx 140 with the speed sequencer transmission that has lost all the gears above 8. Ive swapped the relays around behind the right hand console hoping that one had packed up but still nothing.
Everything was working okay till i dropped it down to 6 to move some bales and now...
Right, here goes. On the road the other day in top gear it started dropping in and out of drive in 4th power shift.
With the clutch pedal down it flashes once indicating none or multiple shift lever signals. I've taken the shift lever apart expecting to find a series of switches and found a...
Friend of mine has a 98 3cx contractractor digger that blew a ps hose a few weeks back. He replaced the hose but every now and then the steering will lock up when turning,When it does this if he turns it back slightly and tries again it will work for a while then starts to lock up again. thought...
Got a 3cx that is overheating the transmission, got the box out and wondering if it's worth pulling it apart or getting a recon. I've done a later syncro shuttle a few years back, but did have a manual and it was surprisingly straightforward.
Using a 5140 on the round baler yesterday and found that the door kept opening before the bale was fully formed, it turns out that the oil is not returning completely throught the external spool. all 4 spools are the same, ive tried a new coupling at the tractor end and also tried a different...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.