Search results

The 7 pin light plug for my massey factory fit front linkage doesn't seem to have the facility's for indicators. Is there a fuse or a relay that needs to be added to make it function? Tried 4 different tractors and all the same.

Most of the staff asked to empty there vans this afternoon. A big shame for all the good staff they had.

Where is the best place to get 50mm hose for my dribble bar? Looking for a roll for repairs.

Perkins enegined 2004 merlo started, ran out of the shed then stopped dead like someone turned off the key. Turns over but no smoke. No power coming to electric lift pump or fuel shut off. Checked the fuses we can see but no joy. Any ideas or suggestions gratefully recieved.

Looking for a wood chipper to chip branches after a quadsaw. Looking for ideas. Seen woodland Mills for sale on tinternet. Any one got experience of them?

On the look for the above. Grain and fert avant front hopper, 4001 - 2 power harrow and coulterbar. Rotec or rotec + discs.

Help required. Looking for oil for back end of a 7618 and 6495. Masseys own oil is a 10w 40 transmission oil. Dealer is supplying a 10w 40 universal oil as a cheaper alternative. Pricing around and a different dealer tells me the universal is no use. It's a 10w 30 transmission oil I should be...

As above. Not looking for anything fancy. Anything laying in the nettles?

At some point I'm going to have to go on to a tandem axle tanker. Question is which is best. Can't afford joskin/Samson so please don't suggest them. It would be between at the moment Abbey Connor Redrock Major NC Spec would be steering axle on 710 tyres. Any experience greatfully received

Seen a 16 year old tractor advertised today with low hours and made me think would It be better buying that or a newer one with higher hours. Is it age or hours that cause problems more?

This has probably been covered before but I can't find anything on it. I have been told I should not trim on frosty days but I've never had any problems. Is it ok to cut on frosty days or will it harm the trees?

So I'm looking at changing a tractor next year. It'll be 200hp+ looking at tractors up to 4k hours. I've noticed a few cvt in my search in my price range. Just wondering what folk are finding values are compaired to PS when it comes to higher hours and trading in. My predicament is do I try cvt...

Interested in people's views on the above. thinking about replacing a tractor next year. It will be second hand and there seems to be a few low hour cvts on the go. Had a demo case cvx and found it just gave up instead of looking for grip. I'm sure my Massey would have done better but very...

Tractor loosing power on the chopper n error code 7777 coming up with a little electric and engine symbol. Any ideas? All help greatly appreciated. Not my tractor. I'm just carting off it. 2016 machine Edit. It's a 620 arion

Thinking of buying a drill but not sure. Anything going around just now. Open to suggestions 3 or 4m. Grain and fert or a grain only I can run with a front hopper for fert. Budget 10k ish but will pay more for the right machine.

Any thing laying about going cheap like the budgie?

Anyone have a good source of the above? I need a set for my hydraulic road brush. Must be suitable for rough roads. Tia

http://www.spearheadmachinery.com/machine/cutterbars/ Are machines like this any good? Was thinking it was a lot safer than a saw and capable of 4 inch according to the blurb. Any of you using one? Cheers

On my massey 7618, I'm getting a intermittent error code thats de-rating the engine. The error code is for a relay. The relay was changed and the wiring checked but made no difference. I'm starting to think that as the tractor gets older and more hours, the ad blue is going to be a liability...

Running complete engine preferred but would consider one in need of repair if it didn't need much done. To fit into Ingersoll rand compressor.