Hi,
The 4 top front work lamps and 2 top rear cab work lamps are all coming back through 1 fuse. From what I can see in the schematic this seems correct but I have melted a couple of 25 amp fuses. That’s 6 x 55w bulbs which equates to roughly 25 amps. Seems like a lot of current to be sending...
Hi all, my MC135 revs to around 1100 when you touch the throttle and then sticks at this rev. When you move the throttle then the management warning light comes on the dash and then goes off when you release the throttle. Any help would be appreciated!
Thanks
Hi,
I left my MC135 to get some work done on the hitch which involved welding the back end and now that I have it back it is stuck in 4wd. The 4wd light is coming on as normal with the switch / when the brake pedal is pressed but it seems to be stuck in 4wd all the time. Could the welding have...
My McCormick 135 seems to be idling a little high. There doesn’t seem to be a traditional screw on the inspector pump to reduce the idling RPM. Is there a simple way of doing this?
Thanks
I’ve recently bought a MC135 and I am ironing out a few teething problems. Latest items are:
Warning symbol appearing when tractor is revved .
Yesterday for the first time when I tried to start it the tractor just turned and turned. No smoke of any kind until eventually I got a puff of white...
Hi,
PTO will engage for a couple of seconds then stop on my McCormick MC135. I’ve been told it could be the speed sensor but was hoping there was some way to confirm this?
Thanks!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.