Yokohama Off-Highway Tires has announced a significant upgrade to its Alliance 885 line of agri-transport tires, introducing high-load sizes tailored for the demands of modern agricultural machinery. The new configurations, 850/50R30.5 and 710/40R22.5, are specifically designed for contemporary...
Had a very informative day with Michelin Tyres this week and there was much discussion about on tractor Tyre inflation systems.
Are they becoming more common?
Would you run them on your machines?
Hi,
Looking to know about flotation tyres for a newholland 7840.. Would 28.1/26’s work with 28 inch rims on the front? Would the ratio be correct? Any advice welcome thanks
Hi,
We have tyre sidewalls/silage rings for sale. All sidewalls have been checked for a clean cut and any sharp wire removed. Large quantities in stock ready to be collected/delivered.
These come in bundles of 27. Each sidewall is roughly 1m x 1m and weighs around 12kg.
Please contact for...
Good evening!
Looking to swap tractor in new year and wanting to get bigger tyres. Currently on 580s r38 wanting to go to 650s r42. However slightly worried about ploughing with 650s. On a 16 inch furrow width on mainly sandy ground but have some heavier too. Got big mole boards which should...
What are peoples opinions of both of these, looking at replacing Goodyear 800/65 R32 on a CX8060, with one of the above in 800/70 R32 size.
1. Will they both fit on standard rims?
2. Will they actually make a significant difference to soil compaction..... or is it a marketing tool?
3. Is the...
now we are starting to see wheeled tractors reach 450+ horse power, do you think wheels/tyres can cope with that much grunt? We demonstrated a fendt 1050. Wow! What a machine. But didn't seem to be able to hold its feet when subsoiling in the wet. I couldn't help but think that if we dropped...
I'm thinking of increasing the width of rubber on my jd 6800. There are 420x85x24 on the front and 460x85x38 on the rear currently. If I change the rears to 600x65x38 will the fronts have to be the same sidewall - 65? Or can the sidewall sizes front and back be different?
Hi all does anyone know what size rims are needed to fit 600x38 rear tyres on a john deere 6800. The rear rim size currently on the tractor is 15x38. Will this fit the 600 tyres or is a larger rim needed? Thanks in advance.
Afternoon, our telehandler is due a new set of boots and wondered if anyone has any experience of the (newish) Michelin Bibload? Our machine only occasionally ventures off road so thought these may fit the bill.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.