Bale handler

[Forever Fendt]

number 2 tacked together and ready to be welded up

 

[Jameshenry]

Tidy job

 

[mx110]

Do you cut your own q-fits? I like the way there tapered out, that couple inch makes big difference in getting things crowded back a little.

 

[Forever Fendt]

Yes bale spikes and forks need that little bit of extra tilt back they carry a lot better

 

[Blackleg]

Very smart

 

[tinman]

nice work there.
do you make them for yourself or for selling on.

something tells me there's a lot more to that workshop then i can see..

 

[Forever Fendt]

These 2 are for me i have borrowed one for the last couple of years but now i can have one in field and one in yard as we have plenty of loadalls but none with a hitch before that i was on squares but its difficult to get them wrapped so i can sell the square bale handler now hopefully

 

[rddrrr]

Made anymore progress on this? What do plan on using as rollers? (assuming it's a twin roller type)
Looks a tidy job

 

[Forever Fendt]

Made anymore progress on this? What do plan on using as rollers? (assuming it's a twin roller type)
Looks a tidy job

The rollers are made used 76mm tube with a 5mm wall, Borrowed one once with 114 mm rollers and they were a bit tight to get out when stacking will be getting the hoses today it may have to be used before painting

 

[Forever Fendt]

Painting will have to wait until next week

 

[Forever Fendt]

Partial strip down I forgot to enlarge the hole

s on one of the swinging arms after threading to get the grease gun end in