Fordson dexta spool valve

[jacobl741]

Hi, does anyone know how to pipe up a spool for on the back of a fordson dexta? And where to get the bracket for the coupling to be fixed to? Thanks

 

[Netherfield]

how to fit spool valves? - Fordson Bulletin Board

 

[forblue]

If you are going to use this for match ploughing i would tactfully suggest you learn by asking ploughmen [sorry plough person] how to use it by setting it up properly, no amount of so called add on will make it better, if you use a hyd top link it will need hyd lever adjustment and chances are you will move it too far unless of course you use electronic sensors, the line has to be drawn some where, and for one thing my old club would frown on anyone using non standard equipment,

 

[jacobl741]

If you are going to use this for match ploughing i would tactfully suggest you learn by asking ploughmen [sorry plough person] how to use it by setting it up properly, no amount of so called add on will make it better, if you use a hyd top link it will need hyd lever adjustment and chances are you will move it too far unless of course you use electronic sensors, the line has to be drawn some where, and for one thing my old club would frown on anyone using non standard equipment,

bought a completely original old 3 ton petit tipping trailer, just wanting to get it so I can use it with the dexta, no ploughing

 

[Netherfield]

If all you want to do is tip a trailer you don't need a spool valve, just a tipping pipe assembly like this:- https://www.agrilineproducts.com/ford-fordson-trailer-tipping-pipe-kit-4525

 

[jacobl741]

If all you want to do is tip a trailer you don't need a spool valve, just a tipping pipe assembly like this:- https://www.agrilineproducts.com/ford-fordson-trailer-tipping-pipe-kit-4525

Cheers for that, can you get a bracket to mount the pipe to?

 

[Netherfield]

For Ford 4000 Trailer Tipping Pipe Bracket (behind seat) in Good Condition | eBay

Part Compatible with.

www.ebay.co.uk

Something like this, might need a bit of alteration to fit Dexta.

looks like there is a bracket to fit under the seat mounting point, finding one is another matter.

 

[tomlad]

There will b a plunger , button in the , auxiliary valve chest , probably pull , to put oil to external tapping piont , then lift, lower with the hydraulic quadrant lever .
Lift Arms wont be powered until u push button back in .
Something to check when the hydraulics won't work .

Arms probably lower due to leaks when plunger out , or in i forget. But unlikely to lift as oil is isolated.

Plunger under ur right knee when sat on seat.
That agriline kit bolt on there.