Is there any material that will wreck micro cutting discs?

[Pilatus]

I ask the above as I am researching how I can make a shipping container, less easy for thieves to break in to by cutting a hole in the side of the container.
Know doubt there are one or two
scum of the earth that are on this forum just so they can see what people like me are trying to do to stop them breaking in to peoples property!!!!
Please pm me if you have any suggestions.

 

[milkloss]

Leave a gas bottle inside with the tap just cracked open

 

[Post Driver]

Did I read somewhere that you can line them with ply, and a disk cutter will struggle with cutting the ply?

 

[bravheart]

What are disc cutters like with that chain saw material used in trousers

 

[Bobthebuilder]

Electric [emoji298]️, just wire it to the mains, if they are prepared to take the time and effort to use cutting equipment not much is gonna stop them

 

[davieh3350]

Emigrate.

 

[Lofty1984]

I’m sure I saw a promo vid of kevelar or similar stuffing a grinder up I’ll have a search see if I can find it again

 

[MrNoo]

Yes Kevlar will F*ck a grinder up good and propper, needs to be 2x2 Twill weave ideally, it is not cheap so maybe un economic to do. East Coast Fiberglass Supplies will sell it. Unsure how you would affix it to the inside of the container.

 

[Pheasant Surprise]

Yes Kevlar will F*ck a grinder up good and propper, needs to be 2x2 Twill weave ideally, it is not cheap so maybe un economic to do. East Coast Fiberglass Supplies will sell it. Unsure how you would affix it to the inside of the container.

Similar idea to the anti-cut material they use in chainsaw trousers....

 

[Robert K]

Did I read somewhere that you can line them with ply, and a disk cutter will struggle with cutting the ply?

That's right just smokes and smells

 

[Robert K]

What about kingspan sheets and ply

 

[TripleSix]

I know of a modified Landrover that was kept in a container, there was many attempts to steal it, all unsuccessful.

They finally cut a hole in the roof, tipped petrol in and fired it.

barstewards.

 

[jthomsonagri]

Burying it is probably the cheapest option or turn it into a concrete bunker, still got the problem of somehow securing the door!

 

[Hilly]

Ah well come back next week with the bottles, try and stop them if you wish.

 

[ED.D]

I ask the above as I am researching how I can make a shipping container, less easy for thieves to break in to by cutting a hole in the side of the container.
Know doubt there are one or two
scum of the earth that are on this forum just so they can see what people like me are trying to do to stop them breaking in to peoples property!!!!
Please pm me if you have any suggestions.

Think you could be right about pikys being on here, started a similar thread last week and had it removed with no explanation as yet?

 

[Lincs Lass]

19mm marine ply will slow them, it won't totally stop them but the time it takes to get through is enough

 

[Cowcalf]

19mm marine ply will slow them, it won't totally stop them but the time it takes to get through is enough

trouble with that is if thy are at all savvy they will just cut the metal on outside and keep blade shallow, or were you using ply different to lining inside

 

[MF565]

Best way I've heard was guy clad inside and outside the container in 3mm steel then filled all the corrigatuions with dry fine sand. Stopped gas axe and I would assume grinders as well. But still only means they Try to find the next weakest bit.

 

[Jhabc]

Buy a load of old double panel houshold radiators from a scrap yard or demolition company and attach them to the inside walls plus fill them with some foul smelling & noxious liquid!

 

[TripleSix]

Hardibacker fire board is very difficult to cut with abrasive cutting discs