Forums
New posts
Forum list
Search forums
What's new
New posts
New resources
Latest activity
Trending Threads
Resources
Latest reviews
Search resources
FarmTV
Farm Compare
Search
Tokens/Searches
Calendar
Upcoming Events
Members
Registered members
Current visitors
New Resources
New posts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Forum list
Search forums
Menu
Log in
Register
Navigation
Install the app
Install
More options
Contact us
Close Menu
Forums
Farm Machinery
Machinery
John Deere experts wanted - parking spring exchange without removing gearbox ?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="A sykes" data-source="post: 7011649" data-attributes="member: 146932"><p>Hi all, just looking for some information on the parking issue as my 7430 stopped putting it into park, today I have removed the chassis rail to get to the side of the gearbox as pictured earlier in the forum, I found that the roll pin had broken that holds the leaver to the shaft that runs into the gearbox, is this a common fault or will there be more gone wrong inside the gearbox that’s caused it to break? You can turn the shaft into the gearbox 90 degrees is an anti clockwise direction so the roll pin would go from horizontal to vertical but unable to shift it going clockwise, if you push the prawl through the hole it will push forwards but only a few millimetres </p><p>Just wondering if all this sounds normal Just before I drop the bottom off the gearbox to double check, didn’t see any filings in the oil when it was dropped </p><p>Thanks in advance</p></blockquote><p></p>
[QUOTE="A sykes, post: 7011649, member: 146932"] Hi all, just looking for some information on the parking issue as my 7430 stopped putting it into park, today I have removed the chassis rail to get to the side of the gearbox as pictured earlier in the forum, I found that the roll pin had broken that holds the leaver to the shaft that runs into the gearbox, is this a common fault or will there be more gone wrong inside the gearbox that’s caused it to break? You can turn the shaft into the gearbox 90 degrees is an anti clockwise direction so the roll pin would go from horizontal to vertical but unable to shift it going clockwise, if you push the prawl through the hole it will push forwards but only a few millimetres Just wondering if all this sounds normal Just before I drop the bottom off the gearbox to double check, didn’t see any filings in the oil when it was dropped Thanks in advance [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Farm Machinery
Machinery
John Deere experts wanted - parking spring exchange without removing gearbox ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top