Mf 77 front 7 pin socket

[will6820]

Looking to rig some work lights up to a nudge bar was hoping to be able to switch them on and off from cab anyone done it already? Had a look in book and found this

Got them plumbed in as shown but no joy when I switch work lights on

 

[Farma Parma]

front worklights in that socket come on with the worklights away from the handrails 100%

 

[e5c0rt.mk1]

If they are led lights, have you got them connected the right way around?

 

[will6820]

front worklights in that socket come on with the worklights away from the handrails 100%

Thanks I’ll investigate further just wanted make sure it was possible

 

[Farma Parma]

Thanks I’ll investigate further just wanted make sure it was possible

6400/7400/7600/7700 etc there all the same afaik

 

[snipe]

Some times it’s handy(no reflection) if you can keep the tractor work lights off and use the one on the front implement especially when going down the road. I wired mine up from the side lights wire with a relay, getting the main power from wire 1.