MF38 combine and header Jct 16 Stoke to Penrith

[wasted years]

20 foot header and combine is just short of 12 foot wide , machine is at J Bloor farm machinery to be delivered midway between Penrith / Carlisle just off JCT 41 M6.

 

[Derky]

Do you know what the width is inside the tyres please? Are we saying its over 3.5 metres wide or sub 3.5 metres wide as it makes a difference as over you will require an attendant along with notifying the police.

 

[wasted years]

I stepped it at just under 12 foot from outer edge of front tyre to outer edge on other side, other wise it wouldn't go through our 12 foot gates.
So in other words under 12foot at its widest point , which is the front tyres.
If it helps at all when I went to see the machine the journey was 150 mile or therabouts.

 

[bobk]

I stepped it at just under 12 foot from outer edge of front tyre to outer edge on other side, other wise it wouldn't go through our 12 foot gates.
So in other words under 12foot at its widest point , which is the front tyres.
If it helps at all when I went to see the machine the journey was 150 mile or therabouts.

Jason probably has a tape.

 

[Strawgalore]

It's ower big for me but Iv sent you a pm with a suggestion

 

[Badshot]

I stepped it at just under 12 foot from outer edge of front tyre to outer edge on other side, other wise it wouldn't go through our 12 foot gates.
So in other words under 12foot at its widest point , which is the front tyres.
If it helps at all when I went to see the machine the journey was 150 mile or therabouts.

What tyres is it on?
A 38 on 800's is 13.5 feet wide I think.