Moore concrete precast troughs

[young&keen]

Hi looking at Moore concrete pre cast troughs the 5 foot feed from both sides ones, anybody got these are any other products from them? Whats your view on them?

 

[cvx175]

Hi looking at Moore concrete pre cast troughs the 5 foot feed from both sides ones, anybody got these are any other products from them? Whats your view on them?

Just took delivery of some moores but different type. Standard ball valves won't fit as not enough threads to go through the box

 

[Blue.]

Neighbours bought some panels from moores a few years ago and the quality was shite,they were cheap though !

 

[young&keen]

@eulb that ses a lot think they might be better left were they are

 

[Dragon]

@eulb that ses a lot think they might be better left were they are

I bought some silage panels few years ago, very good quality, I would recommend them!!

 

[Blue.]

@eulb that ses a lot think they might be better left were they are

Who's doing your ground work?

Ask Wally if he has any troughs or panels off them,I bought some slats and panels off wolfenden a couple of years ago and they were spot on. mr Mids panel came from wolfenden and you know what a fussy feck he is.

 

[young&keen]

not decided who doin ground works yet! They be right if mids got them! Wolfenden about a grand dearer for them be cheaper to shutter trough!

 

[Blue.]

not decided who doin ground works yet! They be right if mids got them! Wolfenden about a grand dearer for them be cheaper to shutter trough!

We shutter the bottom 9" then put a 9" timber on top of the 9" wall,also have the feed passage/trough floor raised 4".

 

[Hilly]

Hi looking at Moore concrete pre cast troughs the 5 foot feed from both sides ones, anybody got these are any other products from them? Whats your view on them?

I just use panels and concrete the bottom, a lot cheaper.

 

[young&keen]

I just use panels and concrete the bottom, a lot cheaper.

how u get on with scraper catching on posts panels are fastened to? Am really after a smooth edge to run tractor scraper against!

 

[Hilly]

how u get on with scraper catching on posts panels are fastened to? Am really after a smooth edge to run tractor scraper against!

Put panels down inside of postsand barrier on top of panel, post is in the trough.

 

[fraggle]

I have some of their 5 foot troughs. Pleased with quality of them. Used them because I want to be able to move them when we do next phase of building work, in a few years time

 

[multi power]

Hi looking at Moore concrete pre cast troughs the 5 foot feed from both sides ones, anybody got these are any other products from them? Whats your view on them?

they are not far from where i grew up n have a good reputation

 

[always busy]

Anybody know the price of the pre cast concrete troughs you can put on outside of a new shed too be filled by diet feeder?

 

[Hilly]

Anybody know the price of the pre cast concrete troughs you can put on outside of a new shed too be filled by diet feeder?

http://www.eildonconcrete.com/ this firm is near me and they are getting a good name, im sure they will be keen to give you a price if you give them a ring with your requirement.

 

[Chae1]

Worst with those troughs is getting someone to clean them out. At least with a pass you can just scrape it with bucket. Did see someone with an attachment that fitted troughs to push crap to end.

 

[Hilly]

Worst with those troughs is getting someone to clean them out. At least with a pass you can just scrape it with bucket. Did see someone with an attachment that fitted troughs to push crap to end.

I remember seeing that attachment, think someone had the pic of it on BFF a longtime ago, well rememberd chae.

 

[W&W Mackie]

Anybody know the price of the pre cast concrete troughs you can put on outside of a new shed too be filled by diet feeder?

Feel free to give me a call to price up any requirement you may have for your feed toughs. We have some on display at Whiteside if you wanted to view them also.