Quote for a few acres of concrete?!

[Doing it for the kids]

Anyone want to jump in?

got a few big jobs, one of 6000 m2 the other of 7000, 8 inch with mesh etc.

its quite a big one for my local gang I think.

feel free to PM me, both sites in Oxfordshire.

 

[designanddetail]

Speak to Connops http://www.connopandson.com/ that's what they do, and they do it well.

 

[Neddy flanders]

sounds like a hideous destruction of the countryside unless its a brown field site.

 

[pine_guy]

@RWG Contracts off your patch, but be a good couple of days work

 

[kill]

Find someone with a laser screed like @RWG Contracts runs

 

[onesiedale]

http://www.lrdconcreteflooring.co.uk/plant-and-equipment-for-hire/
Speak to Lindsay Dicken

 

[Timbo]

Speak to Connops http://www.connopandson.com/ that's what they do, and they do it well.

Recommended. Theyre speciality

 

[Doing it for the kids]

Thanks All.

For the doubters, we have swopped sites so the net gain in green space is actually higher and I’ve now got a better bespoke industrial site to build

 

[Doing it for the kids]

I thought @RWG Contracts is busy now until 2021!?

 

[pine_guy]

I thought @RWG Contracts is busy now until 2021!?

Just started clearing a site for a new dairy building according to his face book page.

 

[Boohoo]

I thought @RWG Contracts is busy now until 2021!?

@RWG Contracts can't be busy, he hasn't posted pictures of concrete in ages

 

[Joseph]

Anyone want to jump in?

got a few big jobs, one of 6000 m2 the other of 7000, 8 inch with mesh etc.

its quite a big one for my local gang I think.

feel free to PM me, both sites in Oxfordshire.

Try these people below they do some big jobs and have done a couple of grain stores for me and their work is first class.

http://www.finetoleranceflooring.co.uk/

 

[Derky]

Feel free to email any plans or drawings to [email protected] or www.lfpearceandson.co.uk. Or give me a ring 07980 602475

 

[TripleSix]

@RWG Contracts can't be busy, he hasn't posted pictures of concrete in ages

Too busy getting his van fixed!?

 

[concrete agri]

are you looking to do it in bays and wat finish do you want

 

[Doing it for the kids]

A good tamp should be fine. I would prefer as fewer bays as Poss but this will be down to the Concrete supplier producing the turn round I guess?

 

[Derky]

A good tamp should be fine. I would prefer as fewer bays as Poss but this will be down to the Concrete supplier producing the turn round I guess?

You need enough expansion joints in the slab and the belt and braces approach is to do it in smaller bays with foam expansion joints and dowels between each slab. Or longer bays and cut expansion joints after. Give me a shout if i can be of help.

 

[concrete agri]

aye agree we always do 5m bays it suits 4.8 mesh than just pull the vibrating screed over it.cut joints every 6m