Today at work
- Thread starter Penmoel
- Start date
You could ask
- Location
- Glen Clova, Angus, DD8 4RD
- Location
- Glen Clova, Angus, DD8 4RD
- Location
- North West
Few jobs out and about today, set of filters on a 6420 first job. Can’t beet some oil down your sleeve to start the day [emoji849].
Then onto a spot of wiring, I usually try and avoid working on hgv’s but this was a shiny new S500 scania so made a exception.
Tracker and real time dash cam.
Plenty of wires to play with
Truck driver isn’t a job I’d like to do, but if I had to this would be my choice of office [emoji848]
Then another 6420, this time an electrical fault which turned out to be a bad contact on a fuse for the bcu controller.
And finally a 6830 with an intermittent can-bus fault, changed the terminators and cleaned some contacts but we’ll have to see if it’s cured it. (No pic of that one)
Then onto a spot of wiring, I usually try and avoid working on hgv’s but this was a shiny new S500 scania so made a exception.
Tracker and real time dash cam.
Plenty of wires to play with
Truck driver isn’t a job I’d like to do, but if I had to this would be my choice of office [emoji848]
Then another 6420, this time an electrical fault which turned out to be a bad contact on a fuse for the bcu controller.
And finally a 6830 with an intermittent can-bus fault, changed the terminators and cleaned some contacts but we’ll have to see if it’s cured it. (No pic of that one)
Speedstar
Member
- Location
- Scottish Borders
That for Mr W ?
- Location
- North West
There’s a strong possibility it could be for Mr W [emoji12]
REStracTORATION
Member
Nail hit squarely
- Location
- Near Colchester
Clad the bottom doors today, pity one of the sheets had got a bit dusty during the storage. 9mm stokboard.
- Location
- Glen Clova, Angus, DD8 4RD
Looking forward to THOSE pics! Tractors from when Fendt were still hand built to exacting standards and the price worked out afterwards.Nail hit squarely
The 311 we had was a lovely old bus, even with 16k hours on it.
REStracTORATION
Member
The build quality of the big fendt is perfect it will be a pleasure to turn out to our standard
Not long now
A few loose ends to tie up on 550
A clutch, service, gearbox repair on a 1390
dB 770 hydraulics to sort
Mudguards and bonnet on a 990 to paint
Mudguards and bonnet etc on 135 to paint
Then it's green and grey in the guns for the fendt run
Ray996
Member
- Location
- North Scotland
What part of the Caithness swamp you in
Tomtrac
Member
- Location
- Penrith cumbria
How come they are coming out !are they getting replaced
Is that what you do ! Supply new etc
- Location
- East Essexshire
No pictures, because they're not very pleasant, and wouldn't be in very good taste if any of the girls who've lost horses happen to see this, but I've been helping clear this up for the last couple of days.
https://www.google.co.uk/amp/s/www.bbc.co.uk/news/amp/uk-england-essex-42220688
https://www.google.co.uk/amp/s/www.bbc.co.uk/news/amp/uk-england-essex-42220688
llamedos
New Member
Sickening, we have also been on the clearing up end of a similar situation. Some images never leave you.
- Location
- Near Colchester
Yuk, and they suspect arson? what kind of animal would think that would be fun?
sixrow
Member
Just beside your place of work
- Location
- south norfolk, uk
Got the old bus out for its clean from harvest (a bit later than planned )
Clocked up a bit more.
)
Clocked up a bit more.