Bossfarmer
Member
- Location
- between Perth and Inverness
looking to put up a new cattle court over 15000 sq ft does anyone know roughly what this wil cost me in scotland? will most likely be 200ft x 80
Cost of planning?
- Thread starter Bossfarmer
- Start date
Bossfarmer
Member
- Location
- between Perth and Inverness
its the cost of the planning im curious about
- Location
- South Wales UK
Depends What your Council's like and how much Money and Consultant Surveys they need off you ?
Fraserb
Member
- Location
- Scottish Borders
£5500 just for the planning, all other fees and such will be on top
- Location
- South Wales UK
I'd want shed for that ?
Bossfarmer
Member
- Location
- between Perth and Inverness
right is it a certain £ per sq ft for planning in scotland?
Fraserb
Member
- Location
- Scottish Borders
Bossfarmer
Member
- Location
- between Perth and Inverness
£401 per square m? ive worked out the shed will be 1486 square m
Fraserb
Member
- Location
- Scottish Borders
No £401 for every 75 square m
Bossfarmer
Member
- Location
- between Perth and Inverness
ok thanks and thats the scottish rate?
Bossfarmer
Member
- Location
- between Perth and Inverness
that comes to £7945?
Fraserb
Member
- Location
- Scottish Borders
1486-540= 920
920/75=12.2 so 13
13 * 401= 5213
5213+401= £5614
920/75=12.2 so 13
13 * 401= 5213
5213+401= £5614
Bossfarmer
Member
- Location
- between Perth and Inverness
ok thanks
ok thanks is this a scottish rate or your local council? how much other fees roughly on top? another £500?
Fraserb
Member
- Location
- Scottish Borders
Scottish as far as I know, fee's are more council dependant
- Location
- Northumberland
Put an application in a few years ago. I sent them the cheque based on the area outer edge of the stantions.
They came back for another £500 because there was a 1 metre cantilever up each side.
Next time might forget to draw the overhang on the plans !!
They came back for another £500 because there was a 1 metre cantilever up each side.
Next time might forget to draw the overhang on the plans !!
dannewhouse
Member
- Location
- huddersfield
don't put dimensions on your drawings they only specify that they are to scale, when reading off a scale drawing you can soon me 1m out!!! (always send plans on a4 makes it hard for them to scale from)
I made the mistake of putting every dimension on once, admitted it was a nob of a neighbour who got the council to pull me up on it all but if the dimensions hadn't been there it all looked correct to scale haha (draw 12ft bays I'm sure they wouldn't notice!!!) only cost me £80 to "amend my application" so I just accepted it and didn't moan, council didn't really bother just had to be seen to act after it had been reported.
ridger
Member
- Location
- Tyrone, Northern Ireland
Get the slats ordered in good time no point waiting
ridger
Member
- Location
- Tyrone, Northern Ireland
Did you go for the second hand or new tractor that time I can't find the thread
lazy farmer
Member
- Location
- som/dor border
have built 4 new sheds in my time. one of them on a footpath. council hasn't a clue. we have a rule about 100metres from a road ?
Headless chicken
Member
- Location
- West Wales
It only costs you money if you get found out. Build first worry about planning later
Edit if your location is really prominent put in for something on the smaller size and just build it bigger. Draws less attention as they know they will have passed something so very unlikely to come and inspect
Edit if your location is really prominent put in for something on the smaller size and just build it bigger. Draws less attention as they know they will have passed something so very unlikely to come and inspect