- Location
- Northumberlandia
Kuhn 3m Combi Drill
Trimble GFX-750 screen Nav 900 Controller recently fitted to my tractor.
If the physical width of the widest part which is the PH is from outer door to the otherside is 3.08m
& the Outside to Outside disc coulters is 2.87m
Ive been advised to add in an extra coulter spacing so say add on another 14cm which then
makes it 3.01m, this is because iam on RTX correction.
So does some of these settings look about right in pic or am i still not right?
Application Width & Swath Width & Machine Width measurements
they dont make this v easy i can tell you.
Deffo no need for any offset surely its on 3 point linkage & pulls dead straight.
HELP...
Trimble GFX-750 screen Nav 900 Controller recently fitted to my tractor.
If the physical width of the widest part which is the PH is from outer door to the otherside is 3.08m
& the Outside to Outside disc coulters is 2.87m
Ive been advised to add in an extra coulter spacing so say add on another 14cm which then
makes it 3.01m, this is because iam on RTX correction.
So does some of these settings look about right in pic or am i still not right?
Application Width & Swath Width & Machine Width measurements
they dont make this v easy i can tell you.
Deffo no need for any offset surely its on 3 point linkage & pulls dead straight.
HELP...