Mursal
Member
Netting or string?
Seem to remember the netting control box gave a bit of trouble .......
Classics Earning their keep.
- Thread starter Tha Ulsterscot
- Start date
Netting or string?
Seem to remember the netting control box gave a bit of trouble .......
- Location
- Moreton-in-Marsh, Glos
Net. Has occasionally given a bit of grief, but not a difficult fix.
Nearly
Member
- Location
- North of York
Drilling wheat.
PJ_Farmer_82
New Member
Just goes to show with proper maintenance some machines will go forever. I keep telling my lads to service the machines properly
Tomtrac
Member
- Location
- Penrith cumbria
Not a truer word said
And they need to have some feeling for the tractor and machine also instead off ragging the a—s off everything
It takes no time to walk around checking bolts etc and you can catch a lot off things before they break /fall off
Nearly
Member
- Location
- North of York
Just fluffing up the headlands before drilling them.
Tractor actually 10cm wider than the old drag.
Tractor actually 10cm wider than the old drag.
- Location
- Sorn Ayrshire
A good job to keep its flues clean,,
devonbrion1998
Member
- Location
- Radnage Buckinhamshire
Now we're talking...
- Location
- Moreton-in-Marsh, Glos
Went to help a neighbour get this going this evening
- Location
- roe valley
classic cutter
Member
another 865
glasshouse
Member
- Location
- lothians
LIKE THE LUGS FOR DUALS
glasshouse
Member
- Location
- lothians
REVERSE DRIVE?
Tomtrac
Member
- Location
- Penrith cumbria
It looks like a MFT loader the type with the loader that fits on rear and you revers drive
Not 100% picture small on me phone but it looks like a MF one not a new holland
At first glance tho i thought it was a MF 1200-1250 then mudgaurds gave it away lol
Nearly
Member
- Location
- North of York
Tomtrac
Member
- Location
- Penrith cumbria
A thousand apology’s
As i said small screen on phone i ran 8340 and 7840s i thought the pick up hitch rods and top link bracket look like the other make
I had a 390 mft on demo in the eights i was well impressed with it on the silo pit as a loader and then using it as a spare tractor when they started doing the new holland version i didnt get my hands on one
Think they are like hens teeth now
Always takes me back when i follow a MFT mounty on the rear off a artic trailor on the roads
I will try and digg a photo out of demoView attachment 727314sorry atch not open i had this before i will try to fix if i can remember
Last edited:
Nearly
Member
- Location
- North of York
Waiting for me to buy another classic.....
Tomtrac
Member
- Location
- Penrith cumbria
We wouldnt get away driving down the road at 12-15 mph on these modern roads in convoy
our 7840 with claas green bonet as was the norm off the fleet to catch peoples eye and get us talked about in old days
last ones two off the first ever new zealand transpread type lime spreader that are still used today
made by land drive off cannobie in the borders the man in blue jacket is the designer inventor from new zealand we had to swop it for a longer one as wen we use trucks to tip into it the lime ran over the ends and the axlebent carting 7-8tonnes of lime in a load direct from the quarrys
Tomtrac
Member
- Location
- Penrith cumbria
