Is that the concrete leading to the slatted tank?Not a huge amount, about 1%
Is that the concrete leading to the slatted tank?Not a huge amount, about 1%
My easy fix matting has been in 5 years now,it’s a pig to clean twice a day but worth every penny.?Could be 20 mm these are the ones I’ve usedView attachment 834495
Sorry had a busy day watching cricket. Will do it tomorrowWill take some in the morning ?
Yeah for these to sit onIs that the concrete leading to the slatted tank?
Great finish on them! I shuttered mine but done them on the level with a weir. Will you be putting a weir in?Yeah for these to sit onView attachment 835018
Where are these from and what are the dimensions please?Yeah for these to sit onView attachment 835018
Concrete porn!That pic should be in the ooooh thread
Great finish on them! I shuttered mine but done them on the level with a weir. Will you be putting a weir in?
These are made by moore concrete and are 500mm deep, 800mm wide and 2.4m longWhere are these from and what are the dimensions please?
I’ve two sizes here 400 feeding into 600 mm shutter both weirs are less than 250 don’t think you could over-spec thoNow that we've gone to the trouble of a concrete base for them, with hindsight shuttered walls would have been far more cost effective, however builder I am using isn't geared up for shuttering so other option would have been blocks. The 1% is just what ties in with floor levels, not expecting it to affect channel, yes will shutter a weir in the end, what height is your weir? The channel is 500mm deep, will I need to make it 250mm for it to be effective?
Pity your boys lost championship.Sorry had a busy day watching cricket. Will do it tomorrow
Pity your boys lost championship.
I’m struggling to see how it’s working ?Hope the pictures help. The hinges in the second picture are offset ensuring the gate wants to shut.
The wire rope in picture 1 runs into the parlour and you pull on it to open the door. Gravity due to the offset hinges shuts its again.
Picture 3 is poor sorry but it is supposed to be showing the door haps which has string attached to it. Which also runs back into the parlour. This allows the door to stay permanently shut when cows are in the race but can be lifted to put more cows in.