- Location
- Cambs
We have a TF35.7 and would like to slow the 3rd service down as it's a bit vicious on our box rotator!
Is there any way of doing this or is it a laptop job?
Thanks
Is there any way of doing this or is it a laptop job?
Thanks
can the joystick roller not be operated gradually? Other operation would be a flow restrictor in the attachment hoses so other implements aren’t affectedWe have a TF35.7 and would like to slow the 3rd service down as it's a bit vicious on our box rotator!
Is there any way of doing this or is it a laptop job?
Thanks
This surelycan the joystick roller not be operated gradually? Other operation would be a flow restrictor in the attachment hoses so other implements aren’t affected
can the joystick roller not be operated gradually? Other operation would be a flow restrictor in the attachment hoses so other implements aren’t affected
Ours the same, found the jerky boom a pain at times so fitted a lever to use when needing a bit of feathering.Our merlo has buttons for the 3rd service so I assume yours are the same. Its either on or off. We had to use a flow restrictor for our bucket brush as it was to fast but it was a fairly cheap and simple modification.