Guess the parts price thread ?
- Thread starter Clive
- Start date
Courier
Member
- Location
- M62 - M1 - M18 triangle
Where's Walt Disney when you need him for all the fairy stories......
Perhaps the TFF marketplace could have a Price Comparison Section for direct purchase of some of these extortionate things ....
Perhaps the TFF marketplace could have a Price Comparison Section for direct purchase of some of these extortionate things ....
john432
Member
- Location
- Carmarthenshire
Oil immersed multi discs, should be ,£20 to£40 , even less. Guess£85
“ Farm Compare “is about easy to launch on TFF - few members testing it for us at the moment !
higher !
serf
Member
- Location
- warwickshire
You may have to hire Donald's security detail if you launch that, and be driven about in the beast
.the main stealers will be carping it
Fitted ?
did front axle brakes on the 526, parts only, iirc was £350 ish that was about 8 years ago so I guess it will be nearer 900 now
marco
Member
- Location
- tipperary, ireland
- Location
- North West
I once had a price for brake discs for a Newholland telehandler, think it was £800 per axle! If I remember right they where dana axles and I got parts from the manufacturers for around £400 for both axles including piston seals.
- Location
- North West
A jd actuator is £800, a complete turbo with the actuator is £1200 which means the turbo is less than the actuator
Nearly
Member
- Location
- North of York
- Location
- South Wales UK
£1850 plus vat
- Location
- northumberland
crown and pinion coggs for amazoneKG403 power harrow
- Location
- south norfolk
Jcb 531/70 control lever got to be replaced as clutch cut out button fell out.after many enquiries it’s a replacement.a snip at £1125.yes you read that correctly
nick...
nick...