- Location
- Easter ross
What model/hp is thatFirst new tractor for us - big step up from the Case CX 100!
View attachment 938178
What model/hp is thatFirst new tractor for us - big step up from the Case CX 100!
View attachment 938178
Haven’t done much with it yet, but v pleased so far. The visibility to the loader is superbI really liked mine.
5713, 130hpWhat model/hp is that
Why did you change ?I really liked mine.
Wanted a vario and the Fendt turned out to be over 20k cheaper than the closest equivalent MF.Why did you change ?
They don't do that for you !!!! UnfortunatelyI've got the basic version of that and its a massive hopper, 4 bags in with a good splash from previous load still in bottom.
Doesn't stripe either unless you forget to lift the headland gadget, expect the gps one will have a sensor, or do it automatically so you cant forget.
Trimming tag team !
View attachment 938171
Kubota new self-propelled!You going on for the council??
Does it lift 2 bale of silage ok?Haven’t done much with it yet, but v pleased so far. The visibility to the loader is superb
Haven’t tried, but the loader is rated at 2.3t and I have been moving 2 x 6 stringers of straw so a bit over a ton and was just starting to feel a bit light on the back. So much more and would need a bit of weight on the backDoes it lift 2 bale of silage ok?
Nope just round the farm , ones mine ones over the other place.You going on for the council??
Mowing at 25kph!!
I always find anything over 12mph feels brutal both on me, and the tractor/mowers
Next week someone will be saying "BrandX mowers are sh!t... ours only lasted three seasons and fell apart." Most mower manufacturers quote their output at a speed of 10km/h, but most people manage a little faster than this in good conditions.
Wouldn't worry, keep her lit!Mine must be well built then, my last front mower did 6 years at those speeds, it did this year at it’s new home at the same and still going strong. 3rd cut, flat rolled, 100 acre field, why not?
If you are cut grass at 25 kph , with triple mower on a standard 4220 fastrac it must be a crop like most people cut with a lawn mowerMine must be well built then, my last front mower did 6 years at those speeds, it did this year at it’s new home at the same and still going strong. 3rd cut, flat rolled, 100 acre field, why not?
Such rubbish, most top quality dairy cow silage could be cut at that speed on a flat field.(bumps and gradient)If you are cut grass at 25 kph , with triple mower on a standard 4220 fastrac it must be a crop like most people cut with a lawn mower
Is that one of those 'global' models?First new tractor for us - big step up from the Case CX 100!
View attachment 938178
Fair enough I would argue a stud pneumatic wheel would have the advantage on all that stuff over a skid bar punctures but if it works for youBetter contour following, less metal fatigue, higher working speed, no punctures, no moving parts.
Why have wheels?