We have cowcare rope scrapers that scrape onto slats in front of the robots. I'm wanting to put slat mats down to help with white line as cows always seem to bull on the slats. Has anyone successfully got a scraper going from concrete passage up onto slat mats without it jamming or damaging the mats? A metal strip had been mentioned as a ramp, but thought that might come loose in time and cause more problems. Wondered about grinding the concrete down so the last mat finishes flush with the concrete, sounds easier said than done.
Auto scrapers onto slat mats.
- Thread starter AWJ26
- Start date
Fraserb
Member
- Location
- Scottish Borders
We used to do something similar, and as you say the metal strips were never a success, I would go for Grinding the concrete down, one of those Grinding disks in a 9" grinder can fairly remove it.
Was thinking about continuing the mats into the passageway which is not slatted.
Does the scraper run far onto the slats? If not, you could leave a couple of feet of the slats without mats where the scraper ends?
Would the cows not lie on the mats
Tends to be lots of cow movement around robots so maybe less opportunity for cows to lie on the slats?
- Tags
- cows
Expanded and improved Sustainable Farming Incentive offer for farmers published
Expanded Sustainable Farming Incentive offer from July will give the sector a clear path forward and boost farm business resilience.
From: Department for Environment, Food & Rural Affairs and The Rt Hon Sir Mark Spencer MP Published21 May 2024
Full details of the expanded and improved Sustainable Farming Incentive (SFI) offer available to farmers from July have been published by the...
From: Department for Environment, Food & Rural Affairs and The Rt Hon Sir Mark Spencer MP Published21 May 2024
Full details of the expanded and improved Sustainable Farming Incentive (SFI) offer available to farmers from July have been published by the...