Bomford hawk 6.5

MattJamesPhotography said:

Does anyone or anyone know on a bomford hawk 6.5 hedge cutter when grease warning comes on the joy stick control screeen what it means. Its all greased but still comes up

Click to expand...

Timer needs resetting possibly as time up.
ICS is it?

MattJamesPhotography said:

I think so yes

Click to expand...

We got the same.
I just fully grease and drive on .
The boy adjusts and resets later.

MattJamesPhotography said:

perfect. so thats for the rotor i take it

Click to expand...

Total Operating hours.
You can set for whatever intervals you like.

If you are getting the timer warning then no doubt you have the ICS controls with the screen.

Press the tick, which will take you to the various menus, highlighted one at a time, individually, use the up/down arrows to go to
'Oil Warnings'
Press the tick
Use down button till arrow is next to 'Grease'
Press the tick to select 'Grease'
Press the down button till the little arrow is next to 'reset timer'
Press the tick, job done.
Then just press the 'back' arrow till you are back on the job timer.

You will eventually get warnings for g/box oil check and tank filter check, its the same process as above.

Same for the job timer, screen should already be on it by default, press the tick, press down to 'reset timer' press tick, press back, job done.

Use the down arrow to scroll through Job timer, total timer and grease timer.

If you disconnect the pto speed sensor on the hedgecutter it stops counting hours and flashing up warnings, our sensor broke and I haven’t missed the warnings every 8 hours