PTO guard rant

Dave W · Apr 12, 2023

Why can’t anyone look after guards.
Real tidy mower just come in.
Both guards been missing for years. Grass wrapped round the shafts and gotten inside the gearboxes.
Chains not been clipped on and sound round wrecking the paint.
Everyone moans that machinery is too expensive yet some can’t be bothered to do the simple stuff to look after it.

ollie989898 · Apr 12, 2023

Can't afford to spend money on that.

Dave W · Apr 12, 2023

ollie989898 said:
Can't afford to spend money on that.

I know you’re joking but that’s the attitude.
However clipping a chain on properly and a bit of grease doesn’t cost anything.
And even the cost of a new guard will be greatly offset by not devaluing the machine by a good few hundred ££

Agriimark · Apr 12, 2023

sadly it involves getting out of the seat and getting your hands dirty which some dont seem keen on doing. to easy to press autosteer and sit on their phone all day.

spin cycle · Apr 12, 2023

so how much do you want for it...as is

Dave W · Apr 12, 2023

spin cycle said:
so how much do you want for it...as is

Plenty of mowers in stock to suit some pockets

Boomerang · Apr 12, 2023

Dave W said:
Why can’t anyone look after guards.
Real tidy mower just come in.
Both guards been missing for years. Grass wrapped round the shafts and gotten inside the gearboxes.
Chains not been clipped on and sound round wrecking the paint.
Everyone moans that machinery is too expensive yet some can’t be bothered to do the simple stuff to look after it.View attachment 1105089 View attachment 1105091 View attachment 1105092

Not unlike combines costing mega 000s left where they finished last field.
Know of one ,newish it was parked up at edge of last field at harvest and there it still sits. Clearly money to burn

Tucker · Apr 12, 2023

Just had our baler serviced and it needed a new guard, so had it done. £145

. My friendly mechanic had a proper rant about the cost of something that could save a life and doesn't get done on farms because of the inflated cost !!! He felt perhaps HSE or someone should subsidise cost ........

Dave W · Apr 12, 2023

Tucker said:
Just had our baler serviced and it needed a new guard, so had it done. £145 . My friendly mechanic had a proper rant about the cost of something that could save a life and doesn't get done on farms because of the inflated cost !!! He felt perhaps HSE or someone should subsidise

Tucker said:
cost ........

£300 there to sort this job.
plus 2 gearboxes to strip, re bearings and re seal.

robo · Apr 12, 2023

Dave W said:
£300 there to sort this job.
plus 2 gearboxes to strip, re bearings and re seal.

View attachment 1105123

these guards pretty good to be fair. only 2 minutes pull the clip out, pull guard back, grease ,push back on reclip

Dave W · Apr 12, 2023

robo said:
these guards pretty good to be fair. only 2 minutes pull the clip out, pull guard back, grease ,push back on reclip

Yes. Not dissimilar to bareco. First time I’ve fitted them and very impressed

Suffolksucklers · Apr 12, 2023

Tucker said:
Just had our baler serviced and it needed a new guard, so had it done. £145 . My friendly mechanic had a proper rant about the cost of something that could save a life and doesn't get done on farms because of the inflated cost !!! He felt perhaps HSE or someone should subsidise cost ........

Our local place was selling complete shafts cheaper than just the guards, where is the the sense in that

robs1 · Apr 12, 2023

Suffolksucklers said:
Our local place was selling complete shafts cheaper than just the guards, where is the the sense in that

Bonkers but happens a lot, I needed the top of a tap a few months ago, it was £19 for one, complete tap exactly the same was £10 for a pair

Dave W · Apr 12, 2023

Suffolksucklers said:
Our local place was selling complete shafts cheaper than just the guards, where is the the sense in that

Yes and no. If you compare apple’s with apples then no. The complete shafts are often of poorer quality but will do a job in most cases

Suffolksucklers · Apr 12, 2023

Dave W said:
Yes and no. If you compare apple’s with apples then no. The complete shafts are often of poorer quality but will do a job in most cases

When it was for a PTO saw bench I took the view it wasn't exactly going to have a lot of torque through it

David. · Apr 12, 2023

Those cheap Sparex etc shafts are mainly cheap Chinese crap.
Who stocks those guards Dave?

Lofty1984 · Apr 12, 2023

Tucker said:
Just had our baler serviced and it needed a new guard, so had it done. £145 . My friendly mechanic had a proper rant about the cost of something that could save a life and doesn't get done on farms because of the inflated cost !!! He felt perhaps HSE or someone should subsidise cost ........

I had this exact conversation earlier it’s a disgrace the price on them

kiwi pom · Apr 12, 2023

It's not that hard to look after them and get a decent life out of them. Anything I operated that I had from new and didn't have a numpty also using it, lasted well.
There's a lot of people operating kit who really shouldn't be.

Dave W · Apr 12, 2023

David. said:
Those cheap Sparex etc shafts are mainly cheap Chinese crap.
Who stocks those guards Dave?

They are sparex gardloc. Should be available most places

Farmer_Joe · Apr 12, 2023

that is the height of stupidity, surely the chain snapped and ended up in the crop?

PTO guard rant

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

0 %

Up to 25%

25-50%

50-75%

75-100%

100% I’ve had enough of farming!

Share this page