Recent content by cfr1964

  1. C

    Copper sulphate

    Afternoon all I went to fill the footbath a wee while ago only to discover we've no formalin left I've got an old tub of copper sulphate but I can't remember the mixing rate Could someone refresh my memory please
  2. C

    Universal joint cups

    Tried that, that's how I usually do it, but it's helluva tight
  3. C

    Universal joint cups

    Was making up a new universal joint earlier and forgot to put grease in one of the cups :banghead: and at least one of the rollers has fallen out Long story short, how can I remove the cup again intact, it's in a new yoke and is rather a tight fit and I don't have a press
  4. C

    Newholland conventional baler range??

    935 was the yellow replacement for the 370 The 370 was made at Aylesbury but production was moved to France for the 900 series I wouldn't be sure that it was any harder to get parts for the 370 than any other old NH baler The old man fixed NH wee balers for years and reckoned the 370 to be...
  5. C

    Delaval tank washer

    We have a Delaval TWA plus tank washer which for a few days hasn't been drawing in the chemical There's a solenoid on the bottom of the chemical dosing unit which I've changed and it's still not working and now it's not drawing hot water either Anyone got any ideas /suggestions? TIA
  6. C

    Is a round baler chamber round

    A New Holland 841 wasn't, the floor was flat
  7. C

    Ford 4600

    (y)
  8. C

    Ford 4600

    Ah well you pays your money you takes your choice (y) Somebody somewhere must like 4600s (and 135s) though, or they wouldn't be so expensive Maybe they thought of buying a Deutz but were put off by the constant dealer merry go round, or parts prices and availability or complexity of repairs...
  9. C

    Ford 4600

    They're not alone in that If a 4600 is only worth £1000 , then a 135 would be £750 ish and there's no chance of that :eek:
  10. C

    Ford 4600

    Is my grammar not good enough for you? Or have you had your hearing damaged by a Ford?
  11. C

    Ford 4600

    All that @7610 super q said they're less inclined to going porous than the 4 cylinders The front axle could be a bit worn on one with a loader if it's done a lot of heavy work, apart from that they're virtually indestructible They're generally very gutsy for 60ish hp , they aren't the quietest...
  12. C

    Ford 4610 or MF590

    I also very much doubt anyone could go past one......if it was heading downhill in low multi power :ROFLMAO:
  13. C

    Ford 4610 or MF590

    Aye and you're just an impartial observer ;)
  14. C

    Ford part number identification

    :ROFLMAO: I prefer boring barsteward :ROFLMAO:
  15. C

    Ford part number identification

    C5NN indicates that it's a tractor part (NN) first released for production in 1965 C stands for the 60s, D for 70s etc plus the second digit is the year Probably originally meant to fit a 4000
Top