clbarclay's latest activity

  • clbarclay
    Would they still weld okay and be less likely to melt through thin sheet then if connect positive to electrode?
  • clbarclay
    clbarclay replied to the thread Weaving gd drill.
    I guess that is why some other double disc coulters have a part that goes round in front of the discs where they move back together.
  • clbarclay
    It a brilliant shop floor and it’s warm and food on tap and the work bench is cleaned daily. But their is one down Side. You get...
  • clbarclay
    clbarclay replied to the thread Farm Engineering.
    If the supply is only say 200bar then it should still operate the crane, but at 2/3 lifting force?
  • clbarclay
    clbarclay replied to the thread Egnos for new combine????.
    There are a whole bundle of issues with the combined accuracy of any satellite steering system. The accuracy of the signal will affect...
  • clbarclay
    No such thing as waste materials on a farm. I have muse heaps and they only become scrap at the moment they cross the scrappy's weight...
  • clbarclay
    clbarclay replied to the thread Weaving gd drill.
    The unidrill worked reasonably well on cultivated ground without rolling before, but my soils are not the light fluffy type.
  • clbarclay
    clbarclay replied to the thread Weaving gd drill.
    I suspect all low disturbance drills will have the same issue if the cultivated ground needs consolidation across the full width.
  • clbarclay
    clbarclay replied to the thread Weaving gd drill.
    I haven't tried my GD on cultivated ground, but I recall the manual for the Moore unidrill strongly recommending rolling cultivated...
  • clbarclay
    I somehow managed to avoid them all despite the nephews best attempts to scatter Lego far and wide.
  • clbarclay
    Retail seems to be about £350...
  • clbarclay
    I just looked up that technic excavator. I would love one but the price... Yikes!!
  • clbarclay
    clbarclay replied to the thread Overlap on rtk one side.
    If you two passes next to each other in the same direction, is the overlap right?
  • clbarclay
    clbarclay replied to the thread OK guys,pull this one apart..
    I went out for a drive today and saw very few fields that had an autumn planted crop growing on them. Either there might only be one...
  • clbarclay
    clbarclay replied to the thread Where to mount a lightbar.
    If you are steering manually with a light bar to guide you, then straight in front of you seems a lot easier. If you have some form of...

Forum statistics

Threads
165,527
Messages
3,783,944
Members
41,593
Latest member
Fordagri
Top