Recent content by Gwj

Have a word with Amazone, might need to put a gauge on it and check and adjust the pressure across the Venturi, it should be just below the relief valve pressure, 9-9.5 bar if I remember rightly. Front to back and back to front are slightly different

Could possibly be the pressure relief valve on the transfer system, be worth a look.

Wasn’t far away from the price of a new one once you added the buyers premium. Did anyone see where the Topcon/Amapad X30 and receiver made? Looked to be the bargain of the day for a while

It’s a special so hydraulic on/off and limiter and no forward speed application. Open the shutters and drive at set speed job soo ok no control box needed

Hello All, I have a Topcon X14 with an SGR1 antenna for basic guidance. Unfortunately the X14 has died and probably not economical to repair. Anyone know if the SGR1 is compatible with the XD display? I like the Topcon gear but don’t want to spend too much as next time a tractor is changed it...

Local ag supplier stocks them https://www.meiriondavies.co.uk/

Hard Yakka, like a red back but I find them comfier. They were slightly cheaper at the time as well

Thanks, I’ll have a word with the lad who does some spannering here.

Speedo’s working fine. You can turn it on and off on a premium through the command centre so wondering if it was a laptop job on a standard

New to me 2012 6230 standard with powerquad+ should it have speed matching on a range change. Previous 2008 6330 standard did. Is it a service advisor job to turn on?

Worn cross shaft won’t help with this either

The triples met a sad end the year before! The trailed one came out and saved the season!

Wonder if that 78’s still going? It was back in 08/09

Google M and A calf systems. Not much they don’t know about these machines and very helpful on the phone

Cheers, I’ll tackle it when things slacken off