Hardweld's latest activity
-
Hardweld replied to the thread Sumo trio on stoney ground.There is many variables to take in to account and hard to put exact figures on life span and compare to other metals. Just going from... -
Hardweld replied to the thread Sumo trio on stoney ground.Tungsten carbide overlay application is a great option for stoney ground conditions, unique blend of crushed carbide particles in the...
-
-
The SP makes for very stress free silaging but there's nothing quite like putting a ridiculous amount of grass through a well set JF...
-
Hardweld replied to the thread welder size?.What sort of a budget do you have ? In my opinion a MIG welder is much easier to learn than a stick welder. A little inverter stick are...
-
Just as a follow up… this morning my jasic 250 on single phase 240v. 15mm to 8mm wall 120 box section.
-
Hardweld replied to the thread Mig welder recomendation.Fantastic little set , I love mine too, really handy for out of workshop work
-
Hardweld replied to the thread Mig welder recomendation.Oxford or warrior as said above, I have both , Oxford is excellent workshop welder, but very heavy . If you are looking to go out and...
-
Hardweld reacted to Mur Huwcun's post in the thread Lathe, mills, drills, slotters, shapers and grinders (not angle grinders) with
Like.
Not sure where to put this if here or in the bodging!!! Anyhow, just before Christmas wanted to get the hedgecutter going but the... -
Hardweld reacted to davidroberts30's post in the thread Lathe, mills, drills, slotters, shapers and grinders (not angle grinders) with Like.
Recently Both sprayer gullwing rams badly corroded and leaking so 2 new 1.25 inch rods...
-
Hardweld replied to the thread Line boring.He is a fantastic Engineering, nothing would phase him
-
Hardweld replied to the thread Lathe, mills, drills, slotters, shapers and grinders (not angle grinders).Thanks very much for the information , very helpful. I will have a little more confidence when facing the daunting challenge of milling...
-
Hardweld replied to the thread Lathe, mills, drills, slotters, shapers and grinders (not angle grinders).Interesting , good to know , what is your opinion on an XYZ machines?, I have one and I'm a bit of a novice in machining. It will be...
-
Hardweld replied to the thread Lathe, mills, drills, slotters, shapers and grinders (not angle grinders).Looks very straight and well cared for. If you can go see it and run it that would be great , check is everything tight. I took a gamble...
-
Hardweld replied to the thread Recommend me a mig welder.Good to hear he still involved, he is excellent to deal with
-
Hardweld replied to the thread Recommend me a mig welder.Oh ok, didn't know that
